A11mark
Posts: 1
Joined: Sat Aug 19, 2017 2:45 pm

Scratch 2.0 beginner

Sat Aug 19, 2017 2:52 pm

Hi, sorry to ask this and I hope I'm in the right forum. I'm new to Raspberry pi, I have a model B+. I've installed Rasbian, updated, upgraded, and dist-upgrade.

However when I go to start scratch 2.0 it won't load. I've searched forums and tried everything. I know it needs flash, but I was told that upgrading would get me flash. It hasn't I've done all of that twice and I'm sure I have the latest upgrades and updates.

Will scratch 2.0 work on a model B? or is it for later versions of the raspberry pi.

Again sorry to ask this

ghp
Posts: 1150
Joined: Wed Jun 12, 2013 12:41 pm
Location: Stuttgart Germany
Contact: Website

Re: Scratch 2.0 beginner

Sat Aug 19, 2017 6:22 pm

Hello,
checked on a pi3 and a piB with same sd-card. Both local scratch2 and web scratch2 run on a pi3, but not on a piB.
Looked to the announcement from the foundation, there is another user who reports problems with pi2.
Most probably the code is only running on the pi3 arm processor.

pggp
Posts: 4
Joined: Sat Aug 19, 2017 6:13 pm

Re: Scratch 2.0 beginner

Sun Aug 20, 2017 7:40 am

See related topic:
viewtopic.php?f=28&t=187731
It looks like the hardware is important.

NoMod_Programming
Posts: 8
Joined: Mon Nov 02, 2015 8:16 pm

Re: Scratch 2.0 beginner

Wed Nov 08, 2017 4:00 am

Scratch 2.0, at the moment, does not support ARMv6 processors, which may lead to the problem you are experiencing. In a terminal, type "scratch2". Does it say "Segmentation Fault"? If so, your hardware is incompatible, and you will not be able to run the official Scratch 2.0 editor. However, there is a project I've been working on called Whiskers that aims to allow it to run on older raspberry pi versions without flash. In a terminal, just paste the following command:

Code: Select all

curl -sLS https://github.com/NoMod-Programming/Whiskers/raw/master/raspi-install.sh | sudo bash
An icon will appear called "Whiskers" on your desktop. You can then run that to use Scratch 2.0 features, and save/open scratch 2.0 files. The Scratch forums topic for this is located here: https://scratch.mit.edu/discuss/topic/168060/

Return to “Scratch”

Who is online

Users browsing this forum: No registered users and 3 guests