iznobe
Posts: 267
Joined: Sun Feb 05, 2017 4:14 pm
Location: Avignon , FRANCE

installation disque mSATA SSD ?

Fri Nov 08, 2019 8:58 am

Bonjour ,

je viens de recevoir le disque et la carte X850 v1.3 que j' ai commander :

https://www.amazon.fr/gp/product/B07WNJ ... UTF8&psc=1
et
https://www.amazon.fr/gp/product/B01768 ... UTF8&psc=1

je me demandais quelle methode faut-il suivre pour pouvoir se passer de la carte micro-SD et installer raspbian buster sur ce disque .

j ' ai bien vu des tutos et des posts sur la section anglaise , mais pas grand chose avec ce type de disque : mSATA3
Last edited by iznobe on Tue Nov 12, 2019 1:52 pm, edited 1 time in total.

tqhien
Posts: 46
Joined: Thu Feb 02, 2012 10:07 am

Re: installation disque M.2

Fri Nov 08, 2019 11:43 am

A priori, ton disque dur SSD sera vu du Rpi comme un disque dur USB. Donc j'imagine que la procédure pour booter sera identique.

iznobe
Posts: 267
Joined: Sun Feb 05, 2017 4:14 pm
Location: Avignon , FRANCE

Re: installation disque mSATA SSD

Fri Nov 08, 2019 12:20 pm

Salut ,

merci pour les infos .

par contre je le branche en USB sur mon ordi , mais il n ' est pas detecté par l' intermediaaire de la carte X850 :

cable USB dans carte X850 => disque dans X850 , la led de la carte s' allume , mais rien avec la commande fdisk -l :evil:
Last edited by iznobe on Tue Nov 12, 2019 1:53 pm, edited 1 time in total.

tqhien
Posts: 46
Joined: Thu Feb 02, 2012 10:07 am

Re: installation disque M.2

Fri Nov 08, 2019 1:21 pm

De ce que je vois sur la fiche d'info, la carte est alimenté en 5V par la carte Rpi. Faut peut-être l'alimenter via le rpi mais le brancher en usb sur le PC pour voir quelque chose ?

iznobe
Posts: 267
Joined: Sun Feb 05, 2017 4:14 pm
Location: Avignon , FRANCE

Re: installation disque M.2

Sun Nov 10, 2019 6:11 pm

Salut ,

a priori juste avec le port USB c ' est suffisant d ' apres la notice sur suptronics :
http://www.suptronics.com/miniPCkits/x850-hardware.html

J ' ai aussi fait un test sous windows : le peripherique est en erreur lors de l' initialisation a cause " d' une erreur materielle grave ", du coup je pense renvoyer le disque et la carte pour faire echanger le tout.

nikotinux
Posts: 694
Joined: Sat Feb 02, 2013 2:11 am

Re: installation disque M.2

Sun Nov 10, 2019 6:42 pm

question conne ? en bootant classiquement avec une carte sd, le disque usb est-il detecté ?

iznobe
Posts: 267
Joined: Sun Feb 05, 2017 4:14 pm
Location: Avignon , FRANCE

Re: installation disque mSATA SSD

Tue Nov 12, 2019 10:52 am

nikotinux wrote:
Sun Nov 10, 2019 6:42 pm
question conne ? en bootant classiquement avec une carte sd, le disque usb est-il detecté ?
Salut ,

" detecté " , tout depend ce que tu entends par là ;) ;) ;)

C ' est ce que j ' ai fait en premier lieu .

j ' ai aussi essayé de le lancer via windows , erreur materielle grave dans le journal .

sous mon ordi linux mint , idem que sous raspbian , impossible d ' initialiser le disque , de formater en CLI , sous gparted , ou en tentant de graver directement l ' image raspbian ...


le bus USB le detecte , mais impossible d ' initialiser le disque ...

voici ce que j ' ai pu voir :

Code: Select all

[email protected]:/boot $ sudo fdisk -l
Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mmcblk0: 29,2 GiB, 31306285056 bytes, 61145088 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xd9b3f436

Device         Boot  Start      End  Sectors  Size Id Type
/dev/mmcblk0p1        8192   532479   524288  256M  c W95 FAT32 (LBA)
/dev/mmcblk0p2      532480 61145087 60612608 28,9G 83 Linux
[email protected]:/boot $
et

Code: Select all

[email protected]:/boot $ dmesg | tail
[  707.341855] usb 1-1.3: new full-speed USB device number 9 using dwc_otg
[  708.381862] usb 1-1.3: device descriptor read/64, error -32
[  708.601856] usb 1-1.3: device descriptor read/64, error -32
[  708.722000] usb 1-1-port3: attempt power cycle
[  709.381859] usb 1-1.3: new full-speed USB device number 10 using dwc_otg
[  709.821856] usb 1-1.3: device not accepting address 10, error -32
[  710.421862] usb 1-1.3: new full-speed USB device number 11 using dwc_otg
[  710.861864] usb 1-1.3: device not accepting address 11, error -32
[  710.862018] usb 1-1-port3: unable to enumerate USB device
[  711.192009] Voltage normalised (0x00000000)
[email protected]:/boot $

Return to “Français”