Page 1 of 1

model A+ dimension and holes position

Posted: Wed Feb 04, 2015 6:46 am
by lilzz
I would like have the mechanic drawing of model A+ showing the board size and hole positions.

Re: model A+ dimension and holes position

Posted: Wed Feb 04, 2015 7:16 am
by simplesi
To what degree of accuracy do you need?

Simon

Re: model A+ dimension and holes position

Posted: Wed Feb 04, 2015 8:28 am
by lilzz
simplesi wrote:To what degree of accuracy do you need?

Simon
mm or inch. regular mechanic drawing.

Re: model A+ dimension and holes position

Posted: Wed Feb 04, 2015 9:06 am
by simplesi
:)

I mean - how accurate do you need :)

What's it needed for - sub-microm electron scanning or a case that fits OK with a big of jiggling?

:)

Simon

PS Thingverse cases give good information
e.g http://www.thingiverse.com/thing:540393

Re: model A+ dimension and holes position

Posted: Wed Feb 04, 2015 10:46 am
by DougieLawson
The A+ mounting holes are identical to the B+
http://www.raspberrypi.org/documentatio ... /README.md
The difference with the A+ is that the board is 20mm shorter.