Can anyone recommend a part number and/or supplier of a mating socket for the 26-pin I/O header?
With thanks for all replies.
-
52midnight
- Posts: 22
- Joined: Fri Nov 09, 2012 3:46 pm
Re: Socket for the IO header.
A few possibilities...
http://www.rapidonline.com/Cables-Conne ... et-19-1021
http://www.amazon.co.uk/2-54mm-Pitch-Fe ... B00977HBFY
http://www.maplin.co.uk/p/raspberry-pi- ... male-n75de
http://www.maplin.co.uk/p/gpio-break-ou ... ign=N95NQ&
http://www.maplin.co.uk/p/gpio-board-wi ... ign=N31NT&
http://www.rapidonline.com/Cables-Conne ... et-19-1021
http://www.amazon.co.uk/2-54mm-Pitch-Fe ... B00977HBFY
http://www.maplin.co.uk/p/raspberry-pi- ... male-n75de
http://www.maplin.co.uk/p/gpio-break-ou ... ign=N95NQ&
http://www.maplin.co.uk/p/gpio-board-wi ... ign=N31NT&
Pi2B Mini-PC/Media Centre: ARM=1GHz (+3), Core=500MHz, v3d=500MHz, h264=333MHz, RAM=DDR2-1200 (+6/+4/+4+schmoo). Sandisk Ultra HC-I 32GB microSD card on '50=100' OCed slot (42MB/s read) running Raspbian/KODI16, Seagate 3.5" 1.5TB HDD mass storage.
-
52midnight
- Posts: 22
- Joined: Fri Nov 09, 2012 3:46 pm
Re: Socket for the IO header.
Many thanks! A big help.