I had my remote working on raspbmc but want to use openelec since it is supported by berryboot.
Lirc seems to work since irw registers the keys I'm pressing
"irw" itself doesn't work but "irw /var/run/lirc/lircd-lirc0" returns the pressed buttons
this tells me the lircd.conf is read just fine.
Code: Select all
OpenELEC:~ # irw ^C OpenELEC:~ # irw /var/run/lirc/lircd-lirc0 0000000020d340bf 00 KEY_OK /storage/.config/lircd.conf 0000000020d340bf 01 KEY_OK /storage/.config/lircd.conf 0000000020d340bf 02 KEY_OK /storage/.config/lircd.conf 0000000020d340bf 00 KEY_OK /storage/.config/lircd.conf 0000000020d340bf 01 KEY_OK /storage/.config/lircd.conf 0000000020d30af5 00 KEY_PLAY /storage/.config/lircd.conf 0000000020d30af5 01 KEY_PLAY /storage/.config/lircd.conf 0000000020d30af5 02 KEY_PLAY /storage/.config/lircd.conf 0000000020d30af5 00 KEY_PLAY /storage/.config/lircd.conf 0000000020d30af5 01 KEY_PLAY /storage/.config/lircd.conf 0000000020d348b7 00 KEY_PREVIOUS /storage/.config/lircd.conf 0000000020d348b7 01 KEY_PREVIOUS /storage/.config/lircd.conf 0000000020d348b7 02 KEY_PREVIOUS /storage/.config/lircd.conf 0000000020d3ca35 00 KEY_MENU /storage/.config/lircd.conf 0000000020d3ca35 01 KEY_MENU /storage/.config/lircd.conf
But openelec doesn't seem to react to the buttons pressed.
dmesg look fine:
under system > settings > input devices I toggled the setting remote control sends keyboard presses. But this changes nothing.
Code: Select all
[ 17.573581] lirc_dev: IR Remote Control driver registered, major 248 [ 17.588344] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned. [ 17.599802] lirc_rpi lirc_rpi.0: lirc_dev: driver lirc_rpi registered at minor = 0 [ 17.599818] lirc_rpi: driver registered! [ 18.559247] lirc_rpi: auto-detected active low receiver on GPIO pin 18
I also added my remote to lircmap.xml under /usr/share/xbmc/system/Lircmap.xml
What am I missing?
i used this guide but it doesn't seem to be enough: http://wiki.openelec.tv/index.php?title ... O_Receiver