I'm running Fedberry 29 on a RPi 3B+. Recently I bought a PiJuice HAT. With the onboard SW1 switch, it should be possible to shut down the device by pressing the swith for 10 secs. That doesn't work. Nothing happen.
As an experiment, I installed the apcupsd package. When pressing the SW1 for 10 secs, I got a broadcast message saying that the system lost the connection to the UPS.
Do I need to enable some feature in the /boot/config.txt to get the shut down to work?
-
larsbjorndal
- Posts: 4
- Joined: Wed Jan 04, 2017 3:59 pm
Re: Shut down with PiJuice HAT
I never managed to get my PiJuice to work as advertised, It was very,very late, never worked properly , and eventually went in the bin.
PeterO
PeterO
Discoverer of the PI2 XENON DEATH FLASH!
Interests: C,Python,PIC,Electronics,Ham Radio (G0DZB),1960s British Computers.
"The primary requirement (as we've always seen in your examples) is that the code is readable. " Dougie Lawson
Interests: C,Python,PIC,Electronics,Ham Radio (G0DZB),1960s British Computers.
"The primary requirement (as we've always seen in your examples) is that the code is readable. " Dougie Lawson