vk4tec
Posts: 131
Joined: Thu Mar 07, 2013 9:05 am
Location: Brisbane QLD
Contact: Website

SD and NOOBS

Thu Dec 15, 2016 1:58 am

Hello

Need a hand. Have all Pi V3.

One is working well - Raspbian

I went to install Noobs on a 16 GB SD card, I used the SD card formatter, and placed full NOOBS and NOOBS lite on the card.

I notice something odd at start up, there is a whole lot of USB HUB errors -71

I then tried the SD card from the Pi 3 that is working and my Pi worked fine.

I even tried disk imager and put debian .img onto the SD card.

Is NOOBS broken ? I doubt it, and the Pi keeps reporting a warning about clusters being wrong.

Tried several cards and sizes. Even formatted on LINUX

Replies to vk4tec @ internode.on.net please

Andrew
---------------------------------
Andrew Rich
email: [email protected]
http://www.tech-software.net/ ( hobby website )
http://59.167.159.165/ ( Raspberry Pi ADS-B server ) RTL SDR

vk4tec
Posts: 131
Joined: Thu Mar 07, 2013 9:05 am
Location: Brisbane QLD
Contact: Website

Re: SD and NOOBS

Thu Dec 15, 2016 6:25 am

Fixed

Can you believe I used an external card reader instead of my SD card slot in my laptop

Weird

Andrew
---------------------------------
Andrew Rich
email: [email protected]
http://www.tech-software.net/ ( hobby website )
http://59.167.159.165/ ( Raspberry Pi ADS-B server ) RTL SDR

Return to “General discussion”