va7db1
Posts: 10
Joined: Sat Mar 19, 2016 12:51 am

Pi3 Audio from 3.5mm jack problem

Mon May 02, 2016 12:12 am

Hi all, relatively new to the Pi in general,am running Raspbian Jesse and had audio coming out of the 3.5mm jack when tested. Then I installed a camera and Pieface 4 relay board that connects to the GPIO connector. Since connecting that board and adding the required files....both the camera and the relay board work fine but I'm no longer able to get audio out of the 3.5mm jack.
I've tried several times using terminal to raspi-config to Advanced and Audio and saving the change then rebooting and typing sound-test and the error I get is "Command Not Found" What am I doing wrong....?? No audio :-( any idea's please

User avatar
gychang
Posts: 24
Joined: Tue Mar 26, 2013 7:54 pm
Location: 95618

Re: Pi3 Audio from 3.5mm jack problem

Mon May 02, 2016 12:51 am

could this be a power supply problem?

klricks
Posts: 6711
Joined: Sat Jan 12, 2013 3:01 am
Location: Grants Pass, OR, USA
Contact: Website

Re: Pi3 Audio from 3.5mm jack problem

Mon May 02, 2016 4:16 am

Where did the command sound-test come from?

Try this: https://www.raspberrypi.org/documentation/usage/audio/
Unless specified otherwise my response is based on the latest and fully updated Raspbian Buster w/ Desktop OS.

Return to “General discussion”