progressivedesigns
Posts: 2
Joined: Sat Mar 16, 2019 2:18 pm
Location: Pune, India

Want to buy 100 Qty. Compute Modules CM3+

Sat Mar 16, 2019 2:39 pm

We want to buy Compute Modules CM3+ in lots of 100 qty.

fruitoftheloom
Posts: 19483
Joined: Tue Mar 25, 2014 12:40 pm
Location: Delightful Dorset

Re: Want to buy 100 Qty. Compute Modules CM3+

Sat Mar 16, 2019 3:37 pm

progressivedesigns wrote:
Sat Mar 16, 2019 2:39 pm
We want to buy Compute Modules CM3+ in lots of 100 qty.

Element14 and RS are the 2 main worldwide resellers

https://cpc.farnell.com/search?ost=Comp ... odule-3pos
adieu

My other Computer is an Asus CS10 ChromeBit running Chrome Operating System.
HP Envy 4500 Wireless Printer supported by HPLIP software in Raspbian Stretch.

progressivedesigns
Posts: 2
Joined: Sat Mar 16, 2019 2:18 pm
Location: Pune, India

Re: Want to buy 100 Qty. Compute Modules CM3+

Sun Mar 17, 2019 5:43 am

Thanks fruitoftheloom :)

Is there any possibility if we can order them ( CM3+ ) in lots of 100 qty. and get them manufactured without Raspberry Pi Name and Logo Printed
on them because we want to use them in our products and we don't want to let our customers/competitors know which parts we are using.
We will design our own carrier board as required.
Gradually we can buy them in lots of 500 / 1000 qty.

User avatar
DougieLawson
Posts: 35119
Joined: Sun Jun 16, 2013 11:19 pm
Location: Basingstoke, UK
Contact: Website Twitter

Re: Want to buy 100 Qty. Compute Modules CM3+

Sun Mar 17, 2019 7:17 am

RS Components & Farnell both allow for mass orders.

The only device that can't be bought in bulk is the RPi Zero.
Note: Having anything remotely humorous in your signature is completely banned on this forum.

Any DMs sent on Twitter will be answered next month.

This is a hippy & doctor free zone.

jamesh
Raspberry Pi Engineer & Forum Moderator
Raspberry Pi Engineer & Forum Moderator
Posts: 22049
Joined: Sat Jul 30, 2011 7:41 pm

Re: Want to buy 100 Qty. Compute Modules CM3+

Sun Mar 17, 2019 7:50 am

progressivedesigns wrote:
Sun Mar 17, 2019 5:43 am
Thanks fruitoftheloom :)

Is there any possibility if we can order them ( CM3+ ) in lots of 100 qty. and get them manufactured without Raspberry Pi Name and Logo Printed
on them because we want to use them in our products and we don't want to let our customers/competitors know which parts we are using.
We will design our own carrier board as required.
Gradually we can buy them in lots of 500 / 1000 rqty.
You would need to talk to [email protected], but it would be expensive to have a custom order.
Principal Software Engineer at Raspberry Pi (Trading) Ltd.
Contrary to popular belief, humorous signatures are allowed. Here's an example...
"My grief counseller just died, luckily, he was so good, I didn't care."

B.Goode
Posts: 7686
Joined: Mon Sep 01, 2014 4:03 pm
Location: UK

Re: Want to buy 100 Qty. Compute Modules CM3+

Sun Mar 17, 2019 7:53 am

Is there any possibility if we can order them ( CM3+ ) in lots of 100 qty. and get them manufactured without Raspberry Pi Name and Logo Printed
on them
If it is possible (and my uninformed opinion is that it is unlikely) then the route might be via the Raspberry Pi Customization Service https://www.element14.com/community/do ... on-service



Note that this is largely a user-supported forum. Unless otherwise explicitly stated all contributions are from other Raspberry Pi users responding on a voluntary basis, and do not necessarily represent the views of the Raspberry Pi Foundation. And recursively that includes this post...


To deal directly with Raspberry Pi Foundation/Trading, use the Contact Us details at the foot of every page of the Raspberry Pi website: https://www.raspberrypi.org/contact/

There is also some information about Trademarks here, although it focuses on not using the Raspberry Pi name and logo inappropriately, rather than wanting to avoid its use on their own licensed products. https://www.raspberrypi.org/trademark-rules/

Heater
Posts: 12102
Joined: Tue Jul 17, 2012 3:02 pm

Re: Want to buy 100 Qty. Compute Modules CM3+

Sun Mar 17, 2019 8:53 am

progressivedesigns,
...we don't want to let our customers/competitors know which parts we are using.
I betting that anyone with the desire and ability to clone your product will almost immediately guess it's a Pi. It's a wasted effort to try and hide it.

Return to “Wanted”