Page 1 of 1

Need someone to code up a python script for my bluetooth joystick to some servos over pi3

Posted: Thu Oct 11, 2018 5:12 am
by mrboog13
So I cannot for the life of me figure how to do it myself (i've tried)

I am using the following stuff:

For bluetooth joystick: https://github.com/UbiquityRobotics/bt_joystick
for servos: https://github.com/FRC4564/Maestro


Servo 0 - up/down panning (up down on joystick)
Servo 1 - side to side panning (side to side on joystick)
Servo 2 - A button (pushes servo a direction and holds at 75% of direction until released)


Can anyone help out?

Re: Need someone to code up a python script for my bluetooth joystick to some servos over pi3

Posted: Thu Oct 11, 2018 11:33 am
by topguy
Its a bit unlikely someone here has exactly that joystick and use Python to program for it.

It would be helpful if you be more specific about what trouble you have with each of the parts of the project:
- 1a: Using the "bt_joystick" github code you linked to.
- 1b : Reading values from the joystick.
- 2a: Using the "maestro" code you linked to.
- 2b: controilling the servos.
- 3: Using values read from the joystick to control servos.

Re: Need someone to code up a python script for my bluetooth joystick to some servos over pi3

Posted: Thu Oct 11, 2018 12:28 pm
by troyw
Hello There,

I might be able to help you. please mail me at: [email protected] and Skype me: cis.troy to discuss more.

Looking forward!

Regards
Troy

Re: Need someone to code up a python script for my bluetooth joystick to some servos over pi3

Posted: Mon Oct 15, 2018 3:11 pm
by NicoleF
Greetings!

I am having the skill-set and experience required. Please get in touch.

Waiting for your reply

Re: Need someone to code up a python script for my bluetooth joystick to some servos over pi3

Posted: Mon Oct 15, 2018 3:40 pm
by mahjongg
NicoleF wrote:
Mon Oct 15, 2018 3:11 pm
Greetings!

I am having the skill-set and experience required. Please get in touch.

Waiting for your reply
This forum does not allow direct communication between members...!!!

so you won't get a reply this way....