I know a lot of this stuff can get lost in translation if it doesn't have the proper heading so I figured I'd make this it's own post as I've had a bunch of people express interest in a VESA mount for their Raspberry Pi.
The Solarbotics VESA Mount for the Raspberry SAFE (http://www.solarbotics.com/product/60103/) is finally released! All you need to do is remove the base from the Raspberry SAFE and add the VESA mount instead.
Larger photos can be found here: http://www.flickr.com/photos/solarbotics/
Sorry all that it took so long to get this product released, you know summer has a crazy way of keeping a company busy. Maker Faires, vacations, BBQs, etc. seem to keep on getting in the way of progress, but i guess that's sometimes a necessary evil sometimes and an enjoyable one at that. Well enough of my ramblings, without further ado here are the details of the new SAFE VESA mount by Solarbotics:
Cutouts for using velcro straps or zip-ties to hold down cables
12mm long bolts available to accommodate different styles of monitors
100x100mm and 75x75mm (from center-to-center) standard VESA hole spacing. Note: 75x75mm holes are quite snug against the SAFE housing
Spacers for allowing room for tie-downs and/or for shallow thread depths
6 hole pattern used to conform to the mounting options of either the regular or Raspberry flavours of SAFE
OSHW (Open Source Hardware) Kit, files available under documentation tab
4 - Acrylic Spacers
4 - M4 x 12mm bolts
1 - Acrylic VESA Mount
Thanks for your patience, and keep us in mind as we'll be doing more custom baseplates and lids in the future! These will give you more options for attaching your Raspberry Pi Board (and Arduinos) to other areas around the home and workplace as well as attaching different accessories to it!