Posts: 82
Joined: Tue Sep 29, 2015 9:23 pm

WIFI setting [Ubiquity ROS]

Mon Jul 29, 2019 10:08 pm

Hello everyone,
I used the ros preinstalled image https://downloads.ubiquityrobotics.com/pi.html for on pi 3 my research. However, they have configured their default wifi to use in the image. I configured my own wifi settings at /etc/wpa_supplicant/wpa_supplicant.conf. But sometimes it connects to the default image wifi, sometimes connects to my own wifi. Actually there was no wpa_supplicant.conf in that directory. I just manually create one with

Code: Select all

sudo nano wpa_supplicant.conf
. I am wondering is there a way to disable the default image wifi and make my own wifi connect every time the pi boots up. Thanks

User avatar
Posts: 8258
Joined: Mon Sep 01, 2014 4:03 pm
Location: UK

Re: WIFI setting

Tue Jul 30, 2019 7:57 am

Perhaps Ubiquity would like to give you support with their third-party Operating System via their own forums here: https://forum.ubiquityrobotics.com/

Return to “Other”