Page 1 of 1

Porting tizen 3.0 on a raspberry pi 3

Posted: Fri Mar 22, 2019 10:47 am
by mmbh
it's my first time to run another os on my RPI3 other than rasbian so I'm trying to set-up tizen 3.0 on my RPI3, I have found this link that describes all the steps to port tizen on a raspberry pi3 https://wiki.tizen.org/3.0_Porting_Guid ... nstruction but after finishing all the steps went I tried to test it stuck in the rainbow screen so my card is not booting. can anyone help with that?

sorry for my poor English writing.

Re: Porting tizen 3.0 on a raspberry pi 3

Posted: Fri Mar 22, 2019 11:12 pm
by drgeoff
There is no Raspberry Pi 3. There are 3B, 3B+ and 3A+. The web page you reference was last updated before the 3B+ and 3A+ were released.

Re: Porting tizen 3.0 on a raspberry pi 3

Posted: Mon Mar 25, 2019 9:29 am
by mmbh
thank you for the reply, so it will not work with my b+ model?

Re: Porting tizen 3.0 on a raspberry pi 3

Posted: Mon Mar 25, 2019 12:40 pm
by fruitoftheloom
mmbh wrote:
Mon Mar 25, 2019 9:29 am
thank you for the reply, so it will not work with my b+ model?

If you mean a 3B+ then Tizen needs newer kernel + firmware, you will need to ask the developers to support their software:

https://wiki.tizen.org/Raspberry_Pi