Page 1 of 1

Ethernet adapter with RISC OS

Posted: Mon Apr 01, 2019 10:25 am
by loftcat
Hi all,

Has anyone had experience getting a Micro USB to ethernet adapter working with a Pi Zero or Model A? I recently purchased this adapter from Pimoroni:

https://shop.pimoroni.com/products/thre ... 2477883847

It works great with Raspbian but I'm not having any luck getting the adapter to be recognised in Risc OS. The device doesn't seem to be recognised under Network -> Internet Configuration -> Interfaces.

If anyone has any tips to get this working I'd be very grateful ! :)

Re: Ethernet adapter with RISC OS

Posted: Mon Apr 01, 2019 10:54 am
by jamesh
I think you have answered you own question - there doesn't appear to be a driver for the device in RISCOS.

Re: Ethernet adapter with RISC OS

Posted: Mon Apr 01, 2019 11:18 am
by fruitoftheloom
loftcat wrote:
Mon Apr 01, 2019 10:25 am
Hi all,

Has anyone had experience getting a Micro USB to ethernet adapter working with a Pi Zero or Model A? I recently purchased this adapter from Pimoroni:

https://shop.pimoroni.com/products/thre ... 2477883847

It works great with Raspbian but I'm not having any luck getting the adapter to be recognised in Risc OS. The device doesn't seem to be recognised under Network -> Internet Configuration -> Interfaces.

If anyone has any tips to get this working I'd be very grateful ! :)

https://www.riscosopen.org/forum/

Re: Ethernet adapter with RISC OS

Posted: Mon Apr 01, 2019 11:24 am
by loftcat
Thanks for the pointers, I'll try the Risc OS Open forum.

Re: Ethernet adapter with RISC OS

Posted: Thu Jun 20, 2019 1:54 am
by Behodar
I realise that this thread's a couple of months old, but for completeness' sake the EtherUSB readme lists the supported chipsets.