Joeledmund
Posts: 20
Joined: Sat Oct 20, 2012 4:15 am

puppy doesn't work on new board?!?

Wed Oct 24, 2012 7:38 am

i dont know if it is me or the 512Mb Rpi but i cant get puppy to work at all the little green light doen't even turn on but i got wheezy to work 8gb sd , tiny core linux to work 256Mb sd, and fendora to work 4gb sd
i even tried the new alpha 3 and 4 so i dont know what to do

cport80
Posts: 1
Joined: Thu Dec 20, 2012 11:55 am

Re: puppy doesn't work on new board?!?

Thu Dec 20, 2012 12:06 pm

Puppy does work on the 512mb pi but I think there was an issue with the loader of the Alpha4 release. If I remember rightly I had to mount the sd card on a PC and replace the bootcode.bin file with the one from a Raspbian install.

I have it running here and like all the other puppy variants it seems very slick with a good selection of applications :).

drgeoff
Posts: 8442
Joined: Wed Jan 25, 2012 6:39 pm

Re: puppy doesn't work on new board?!?

Sat Dec 29, 2012 5:20 pm

See http://www.raspberrypi.org/phpBB3/viewt ... 54#p242754 for the explanation that new firmware is required for the 512M RPi. The Puppy distributions have an older firmware.

don570
Posts: 24
Joined: Mon Oct 26, 2015 10:15 pm

Re: puppy doesn't work on new board?!?

Mon Oct 26, 2015 10:39 pm

A puppy user has reported success in installing FatdogArm
on new board.
I've got to run FatdogArm on a Raspberry Pi 2 and using Berryboot as bootloader.
http://murga-linux.com/puppy/viewtopic. ... &start=210

It needs testing.
__________________________________________________________________

Return to “Puppy”

Who is online

Users browsing this forum: No registered users and 1 guest