Page 1 of 1

Pignus - Fedora 23 on model 1's

Posted: Mon Feb 08, 2016 4:55 pm
by macemoneta
For those that use Pidora on their RPi model 1, you might be interested in Pignus. This distribution picks up where Pidora left off, with current software:

*Optimized for ARMv6, BCM2835 architecture
*Uses mainline Linux kernel
*Boots with U-Boot

For the Raspberry Pi Model A, Raspberry Pi Model A+, Raspberry Pi Model B and Raspberry Pi Zero boards.

From the FAQ:

You did an Alpha release. When are you doing a real release?
When it's ready. Which likely is Q1 2016.