raspip
Posts: 3
Joined: Wed Feb 26, 2014 9:51 am
Location: London

Yikes! Invalid device signature [solved]

Wed Feb 26, 2014 9:57 am

Have I fried the ATMEGA328P?

I checked all connectors but I am getting:

raspip@raspberrypi:~/gertduino$ avrdude -F -c gpio -p m328p blink.hex -Uflash:w:blink.hex

avrdude: AVR device not responding
avrdude: initialization failed, rc=-1
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000
avrdude: Yikes! Invalid device signature.
avrdude: Expected signature for ATMEGA328P is 1E 95 0F
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
Last edited by raspip on Wed Mar 05, 2014 8:50 pm, edited 1 time in total.

raspip
Posts: 3
Joined: Wed Feb 26, 2014 9:51 am
Location: London

Re: Yikes! Invalid device signature [solved]

Wed Mar 05, 2014 8:48 pm

if someone has the same problem replacing the chip with:

http://cpc.farnell.com/arduino/a000048/ ... /dp/SC1256 solved the problem.

The only thing I did was try to run a program that was running OK on my arduino.

Dunno why it fried :|

Return to “HATs and other add-ons”