I have a raspberry pi and was intending to use my existing webcam with it. It was not listed on the Raspberry Pi Verified Peripherals page, but I followed a tutorial online, and found that if I used the Raspberry Pi firmware updater (rpi-update), the camera showed up under /dev/video0
I then installed uvccapture, and used its deafault command uvccapture -m to capture the picture snap.jpg. When viewing the photo, however, all the colours were wrong. The gray areas are the window panes, the green lines are the window frame, the pink is the curtain, and the black is the walls.
I looked at http://www.raspberrypi.org/phpBB3/viewt ... 3&p=148309, but even with using the script, and trying other applications (such as the webcam viewer in Scratch), the picture always looked the same.
Is this camera incompatible? Or is there a configuration file that I have to tweak to acheive the best results?