tmanieropiron
Posts: 2
Joined: Wed Nov 07, 2018 1:30 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Thu Nov 08, 2018 11:30 am

write to t.maniero at piron dot it

Thank you!
Thomas

dennisc
Posts: 5
Joined: Mon Feb 25, 2019 10:11 am

Re: LVDS add-on for Raspberry models with 40pin GPIO

Mon Feb 25, 2019 10:18 am

Please let me know how to get my email address across to you! Would like to buy one.

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Fri Mar 01, 2019 7:14 pm

dennisc wrote: Please let me know how to get my email address across to you! Would like to buy one.
do it in the same way as Thomas did in the post before yours!

Let me know which display you want to connect (either post.the data sheet or a picture of the LVDS mapping) as I need to check if the remaining boards can be used.

dennisc
Posts: 5
Joined: Mon Feb 25, 2019 10:11 am

Re: LVDS add-on for Raspberry models with 40pin GPIO

Mon Mar 04, 2019 7:00 pm

here we go!

xxx _at_ me _dot_ com
Last edited by dennisc on Tue Mar 05, 2019 10:39 am, edited 3 times in total.

dennisc
Posts: 5
Joined: Mon Feb 25, 2019 10:11 am

Re: LVDS add-on for Raspberry models with 40pin GPIO

Tue Mar 05, 2019 8:03 am

here is the datasheet!
screen2.png
screen2.png (105.22 KiB) Viewed 993 times

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Tue Mar 05, 2019 9:02 am

dennisc wrote: here is the datasheet!
Pinout is not what I'm interrested in!
I need to know the LVDS data mapping. So, please check your display spec for some informaton like the one shown below.
R1R0mapping.jpg
Y0= ...R1,R0 LVDs mapping
R1R0mapping.jpg (48.91 KiB) Viewed 984 times
Your display need to have this mapping as there are no PCBs left which support Y0=..R3,R2 (look at the first post in this treath for seeing the difference).

dennisc
Posts: 5
Joined: Mon Feb 25, 2019 10:11 am

Re: LVDS add-on for Raspberry models with 40pin GPIO

Tue Mar 05, 2019 10:01 am

I think it is the right version!
screen3.png
screen3.png (142.54 KiB) Viewed 975 times

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Tue Mar 05, 2019 10:04 am

yes, mapping is correct. I will let you know the details by e-mail.

have you received my e-mail btw?

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Tue Mar 05, 2019 10:04 am

yes, mapping is correct. I will let you know the details by e-mail.

have you received my e-mail btw?

dennisc
Posts: 5
Joined: Mon Feb 25, 2019 10:11 am

Re: LVDS add-on for Raspberry models with 40pin GPIO

Tue Mar 05, 2019 10:08 am

Hi,

made a mistake in writing it...

xxxx _at_ me _dot_ com

sorry!
Last edited by dennisc on Tue Mar 05, 2019 10:39 am, edited 1 time in total.

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Tue Mar 05, 2019 10:20 am

Just send an e-mail to <somebodys mail address > with details.
Let me know if you've received it.

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Fri Mar 08, 2019 8:54 am

Sharp LQ121S1LG81 timing

Code: Select all

#h_active_pixels = 800
#h_sync_polarity = 1
#h_front_porch = 168
#h_sync_pulse = 2
#h_back_porch = 86
#v_active_lines = 600
#v_sync_polarity = 1
#v_front_porch = 43
#v_sync_pulse = 2
#v_back_porch = 21
#v_sync_offset_a = 0
#v_sync_offset_b = 0
#pixel_rep = 0
#frame_rate = 60
#interlaces = 0
#pixel_freq = 40000000
#aspect_ratio = 1
LQ121S1LG81.JPG
Sharp LQ121S1LG81 connected to LVDS4PI
LQ121S1LG81.JPG (129.44 KiB) Viewed 895 times

TomekRST
Posts: 1
Joined: Wed Mar 13, 2019 9:52 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Wed Mar 13, 2019 10:01 pm

Hi!

Interested in your product. I can’t PM you. Could you send me your email over here: tomtom.mk2 at gmail

Thanks in advance.
Tomek

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Thu Mar 14, 2019 5:56 am

TomekRST wrote:
Wed Mar 13, 2019 10:01 pm
Hi!

Interested in your product. I can’t PM you. Could you send me your email over here: tomtom.mk2 at gmail

Thanks in advance.
Tomek
PM function has been disabled on the RPI forum quite a while ago.
Well, I would not call the board 'a product'; it's more a proof-of-concept. Will send e-mail with dot-com domain; let me know in case you did not receive it.

kelroy
Posts: 3
Joined: Wed May 22, 2019 8:17 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Wed May 22, 2019 8:32 pm

aBUGSworstnightmare wrote:
Thu Mar 14, 2019 5:56 am
TomekRST wrote:
Wed Mar 13, 2019 10:01 pm
Hi!

Interested in your product. I can’t PM you. Could you send me your email over here: tomtom.mk2 at gmail

Thanks in advance.
Tomek
PM function has been disabled on the RPI forum quite a while ago.
Well, I would not call the board 'a product'; it's more a proof-of-concept. Will send e-mail with dot-com domain; let me know in case you did not receive it.
Hi aBUGSworstnightmare, i was reading the whole post and others about dpi to lvds and this inspired me to design one, really thanks to your work man. But i am having a small problem. I really dont know how to obtain the correct dpi_timings and dpi_output_format. Could you help me please?

Or if it's some tutorial/detailed guide to obtain this.

Some photos of my actually job (it's a prototype so i make the things big xD):

Board:
Image
Image


Datasheet:
Image
Image
Image


RGB format, actually i se the jumper to 8.
Image

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Thu May 23, 2019 6:04 am

Hi,
Details on DPI are here https://www.raspberrypi.org/documentati ... /README.md

Your display spec should have all the details to figure out dpi_oitput format. You've posted some of the timing details already, polarity infos should be available from some chart in your dieplay spec.

kelroy
Posts: 3
Joined: Wed May 22, 2019 8:17 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Thu May 23, 2019 9:34 am

aBUGSworstnightmare wrote:
Thu May 23, 2019 6:04 am
Hi,
Details on DPI are here https://www.raspberrypi.org/documentati ... /README.md

Your display spec should have all the details to figure out dpi_oitput format. You've posted some of the timing details already, polarity infos should be available from some chart in your dieplay spec.
Yes, at least i understand the dpi_output_format.

But on the timmings... i just inderstand a few things like the h and v lanes, frame rate.... but the others, i could not figure how to obtain this in base of the datasheet.

Finally i have it working, damm chinesse datasheets... they are really bad.

aBUGSworstnightmare
Posts: 1275
Joined: Tue Jun 30, 2015 1:35 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Thu May 23, 2019 1:49 pm

There should be a chart that explains values from table 3.3.4
There you can see how polarities are etc. And how to interpret the rest

kelroy
Posts: 3
Joined: Wed May 22, 2019 8:17 pm

Re: LVDS add-on for Raspberry models with 40pin GPIO

Fri May 24, 2019 9:36 am

Yes, finally i made it works. At least was hard but i found this post that explain a bit things and with that and other reads i found a solution.

That its the post i saw: https://timetoexplore.net/blog/video-ti ... 720p-1080p

Return to “HATs and other add-ons”