gilleszo
Posts: 4
Joined: Mon Jul 31, 2017 11:39 am

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Jul 31, 2017 11:49 am

Hello,

unfortunately i have an issue to install Realtek RTL8192EU!
I've no error message during the installation process,
but i cannot see my wifi card... :cry:

what i'v done:

Code: Select all

pi@raspberrypi:/tmp $ tar xzf 8192eu-4.9.24-991.tar.gz 
pi@raspberrypi:/tmp $ ls
8192eu.conf  8192eu.ko  install.sh
pi@raspberrypi:/tmp $ ls -al 
total 1828
drwxrwxrwt  7 root root    4096 Jul  5 11:50 .
drwxr-xr-x 21 root root    4096 Jul  5 11:45 ..
-rw-r--r--  1 pi   pi        67 Jul  2 04:13 8192eu.conf
-rw-r--r--  1 pi   pi   1831963 Jul  2 04:13 8192eu.ko
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .font-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .ICE-unix
-rwxr-xr-x  1 pi   pi       655 Jul  2 04:13 install.sh
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .Test-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .X11-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .XIM-unix
pi@raspberrypi:/tmp $ nano install.sh 
pi@raspberrypi:/tmp $ ./install.sh 

pi@raspberrypi:/tmp $ ./install.sh 
sudo install -p -m 644 8192eu.ko /lib/modules/4.9.35-v7+/kernel/drivers/net/wireless
sudo depmod 4.9.35-v7+

Reboot to run the driver.

If you have already configured your wifi it should start up and connect to your
wireless network.

If you have not configured your wifi you will need to do that to enable the wifi.
pi@raspberrypi:/tmp $ ifconfig

Code: Select all

pi@raspberrypi:~ $ lsusb
Bus 001 Device 004: ID 0bda:818b Realtek Semiconductor 

Code: Select all

pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux
Could you please tell if this issue can be solved ? :)

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Jul 31, 2017 5:30 pm

gilleszo wrote:
Mon Jul 31, 2017 11:49 am
Hello,

unfortunately i have an issue to install Realtek RTL8192EU!
I've no error message during the installation process,
but i cannot see my wifi card... :cry:

what i'v done:

Code: Select all

pi@raspberrypi:/tmp $ tar xzf 8192eu-4.9.24-991.tar.gz 
pi@raspberrypi:/tmp $ ls
8192eu.conf  8192eu.ko  install.sh
pi@raspberrypi:/tmp $ ls -al 
total 1828
drwxrwxrwt  7 root root    4096 Jul  5 11:50 .
drwxr-xr-x 21 root root    4096 Jul  5 11:45 ..
-rw-r--r--  1 pi   pi        67 Jul  2 04:13 8192eu.conf
-rw-r--r--  1 pi   pi   1831963 Jul  2 04:13 8192eu.ko
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .font-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .ICE-unix
-rwxr-xr-x  1 pi   pi       655 Jul  2 04:13 install.sh
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .Test-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .X11-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .XIM-unix
pi@raspberrypi:/tmp $ nano install.sh 
pi@raspberrypi:/tmp $ ./install.sh 

pi@raspberrypi:/tmp $ ./install.sh 
sudo install -p -m 644 8192eu.ko /lib/modules/4.9.35-v7+/kernel/drivers/net/wireless
sudo depmod 4.9.35-v7+

Reboot to run the driver.

If you have already configured your wifi it should start up and connect to your
wireless network.

If you have not configured your wifi you will need to do that to enable the wifi.
pi@raspberrypi:/tmp $ ifconfig

Code: Select all

pi@raspberrypi:~ $ lsusb
Bus 001 Device 004: ID 0bda:818b Realtek Semiconductor 

Code: Select all

pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux
Could you please tell if this issue can be solved ? :)
Install the correct version of the driver. uname -a shows 4.9.35-v7+ #1014. So download file 8192eu-4.9.35-v7-1014.tar.gz.

Try this

Code: Select all

wget http://fars-robotics.net/8192eu-4.9.35-v7-1014.tar.gz
tar xzf 8192eu-4.9.35-v7-1014.tar.gz
./install.sh
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

gilleszo
Posts: 4
Joined: Mon Jul 31, 2017 11:39 am

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Jul 31, 2017 5:33 pm

MrEngman wrote:
Mon Jul 31, 2017 5:30 pm
gilleszo wrote:
Mon Jul 31, 2017 11:49 am
Hello,

unfortunately i have an issue to install Realtek RTL8192EU!
I've no error message during the installation process,
but i cannot see my wifi card... :cry:

what i'v done:

Code: Select all

pi@raspberrypi:/tmp $ tar xzf 8192eu-4.9.24-991.tar.gz 
pi@raspberrypi:/tmp $ ls
8192eu.conf  8192eu.ko  install.sh
pi@raspberrypi:/tmp $ ls -al 
total 1828
drwxrwxrwt  7 root root    4096 Jul  5 11:50 .
drwxr-xr-x 21 root root    4096 Jul  5 11:45 ..
-rw-r--r--  1 pi   pi        67 Jul  2 04:13 8192eu.conf
-rw-r--r--  1 pi   pi   1831963 Jul  2 04:13 8192eu.ko
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .font-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .ICE-unix
-rwxr-xr-x  1 pi   pi       655 Jul  2 04:13 install.sh
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .Test-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .X11-unix
drwxrwxrwt  2 root root    4096 Jul  5 11:45 .XIM-unix
pi@raspberrypi:/tmp $ nano install.sh 
pi@raspberrypi:/tmp $ ./install.sh 

pi@raspberrypi:/tmp $ ./install.sh 
sudo install -p -m 644 8192eu.ko /lib/modules/4.9.35-v7+/kernel/drivers/net/wireless
sudo depmod 4.9.35-v7+

Reboot to run the driver.

If you have already configured your wifi it should start up and connect to your
wireless network.

If you have not configured your wifi you will need to do that to enable the wifi.
pi@raspberrypi:/tmp $ ifconfig

Code: Select all

pi@raspberrypi:~ $ lsusb
Bus 001 Device 004: ID 0bda:818b Realtek Semiconductor 

Code: Select all

pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST 2017 armv7l GNU/Linux
Could you please tell if this issue can be solved ? :)
Install the correct version of the driver. uname -a shows 4.9.35-v7+ #1014. So download file 8192eu-4.9.35-v7-1014.tar.gz.

Try this

Code: Select all

wget http://fars-robotics.net/8192eu-4.9.35-v7-1014.tar.gz
tar xzf 8192eu-4.9.35-v7-1014.tar.gz
./install.sh
Thank's for your quick answer, i will test it tomorrow and will let you know :)

gilleszo
Posts: 4
Joined: Mon Jul 31, 2017 11:39 am

Re: Realtek RTL8192EU ID 0BDA:818B

Tue Aug 01, 2017 7:02 am

MrEngman wrote:
Mon Jul 31, 2017 5:30 pm

Code: Select all

Try this [code]wget http://fars-robotics.net/8192eu-4.9.35-v7-1014.tar.gz
tar xzf 8192eu-4.9.35-v7-1014.tar.gz
./install.sh
Many thank's it's working :),
you made my day :p

dineshaggarwal
Posts: 3
Joined: Thu Jul 06, 2017 4:45 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Tue Aug 01, 2017 6:51 pm

wget http://fars-robotics.net/8192eu-4.9.35-v7-1014.tar.gz
tar xzf 8192eu-4.9.35-v7-1014.tar.gz
./install.sh


I am always getting 404 error. I tried it with dl.dropboxusercontent.com.... also. But getting same error. Version information is correct. Please help!!

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Tue Aug 01, 2017 7:18 pm

dineshaggarwal wrote:
Tue Aug 01, 2017 6:51 pm
wget http://fars-robotics.net/8192eu-4.9.35-v7-1014.tar.gz
tar xzf 8192eu-4.9.35-v7-1014.tar.gz
./install.sh


I am always getting 404 error. I tried it with dl.dropboxusercontent.com.... also. But getting same error. Version information is correct. Please help!!
Not sure why you should be getting the 404 error. A typo in the command you used would be a possibility.

I just copied the URL link from your post and then downloaded it using wget and the copy of your link and it downloaded OK to one of my Pi's

The dropbox link will not work.
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

dineshaggarwal
Posts: 3
Joined: Thu Jul 06, 2017 4:45 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Tue Aug 01, 2017 7:23 pm

Hello Friends, Please disregard my last post. It is working now. Thanks

tecnoArcangel
Posts: 1
Joined: Wed Aug 02, 2017 2:22 am

Re: Realtek RTL8192EU ID 0BDA:818B

Wed Aug 02, 2017 2:49 am

Hello friends, I have this problem. Im trying to install the driver for my wifi adapter AWUS036ACH, it have the RTL8812AU chipset but I been trying make it work.

When I install realtek-rtl88xxau-dkms shows the following message

Code: Select all

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  realtek-rtl88xxau-dkms
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/1522 kB of archives.
After this operation, 14.8 MB of additional disk space will be used.
Selecting previously unselected package realtek-rtl88xxau-dkms.
(Reading database ... 143493 files and directories currently installed.)
Preparing to unpack .../realtek-rtl88xxau-dkms_4.3.21~20170330-0kali1_all.deb ...
Unpacking realtek-rtl88xxau-dkms (4.3.21~20170330-0kali1) ...
Setting up realtek-rtl88xxau-dkms (4.3.21~20170330-0kali1) ...
Loading new realtek-rtl88xxau-4.3.21~20170330 DKMS files...
It is likely that 4.4.50-v7 belongs to a chroot's host
Building for 4.4.50-v7
Building initial module for 4.4.50-v7
Error! Bad return status for module build on kernel: 4.4.50-v7 (armv7l)
Consult /var/lib/dkms/realtek-rtl88xxau/4.3.21~20170330/build/make.log for more information.
Im using Kali Linux 2017.1

This is my info

Code: Select all

root@kali:~# uname -a
Linux kali 4.4.50-v7 #1 SMP Fri Apr 21 01:18:29 CDT 2017 armv7l GNU/Linux

Code: Select all

root@kali:~# lsusb
Bus 001 Device 007: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter

Code: Select all

root@kali:~# cat /proc/version
Linux version 4.4.50-v7 (root@builder) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) ) #1 SMP Fri Apr 21 01:18:29 CDT 2017

Code: Select all

root@kali:~# gcc --version
gcc (Debian 6.3.0-18) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Here I did what this post said

Code: Select all

root@kali:~# sudo wget http://fars-robotics.net/install-wifi -O /usr/bin/install-wifi
--2017-08-02 02:08:38--  http://fars-robotics.net/install-wifi
Resolving fars-robotics.net (fars-robotics.net)... 212.23.8.80
Connecting to fars-robotics.net (fars-robotics.net)|212.23.8.80|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 16141 (16K) [text/plain]
Saving to: ‘/usr/bin/install-wifi’

/usr/bin/install-wi 100%[===================>]  15.76K  53.4KB/s    in 0.3s    

2017-08-02 02:08:39 (53.4 KB/s) - ‘/usr/bin/install-wifi’ saved [16141/16141]

root@kali:~# sudo chmod +x /usr/bin/install-wifi
root@kali:~# sudo install-wifi -h

 *** Raspberry Pi wifi driver installer by MrEngman.
 *** Performing self-update
/usr/bin/install-wifi: line 19: curl: command not found
 !!! Failed to download update for install-wifi!
 !!! Make sure you have ca-certificates installed and that the time is set correctly
Please help me, I have two weeks trying :(

Karmus
Posts: 1
Joined: Mon Aug 07, 2017 6:29 am

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Aug 07, 2017 6:36 am

Although not the Raspberry, I have issues with compiling for the platform aarch64, even though I have installed headers. It cannot find the correct folders in build/arch, and when I change the architecture to arm64, it shows some other errors.

Code: Select all

osmc@osmc:/home/osmc# uname -a
Linux osmc 3.14.29-28-osmc #1 SMP Tue Aug 1 00:00:14 UTC 2017 aarch64 GNU/Linux
I know you probably don't have time to debug this, nevertheless, I just wanted to reach out to an expert on this particular chipset. Tremendously many people have issues with this driver. I would really want to look for an alternative in stead of messing around with old code.

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Aug 07, 2017 11:13 am

tecnoArcangel wrote:
Wed Aug 02, 2017 2:49 am
Hello friends, I have this problem. Im trying to install the driver for my wifi adapter AWUS036ACH, it have the RTL8812AU chipset but I been trying make it work.

When I install realtek-rtl88xxau-dkms shows the following message

Code: Select all

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  realtek-rtl88xxau-dkms
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/1522 kB of archives.
After this operation, 14.8 MB of additional disk space will be used.
Selecting previously unselected package realtek-rtl88xxau-dkms.
(Reading database ... 143493 files and directories currently installed.)
Preparing to unpack .../realtek-rtl88xxau-dkms_4.3.21~20170330-0kali1_all.deb ...
Unpacking realtek-rtl88xxau-dkms (4.3.21~20170330-0kali1) ...
Setting up realtek-rtl88xxau-dkms (4.3.21~20170330-0kali1) ...
Loading new realtek-rtl88xxau-4.3.21~20170330 DKMS files...
It is likely that 4.4.50-v7 belongs to a chroot's host
Building for 4.4.50-v7
Building initial module for 4.4.50-v7
Error! Bad return status for module build on kernel: 4.4.50-v7 (armv7l)
Consult /var/lib/dkms/realtek-rtl88xxau/4.3.21~20170330/build/make.log for more information.
Never used DKMS so no idea what the problem may be. What is reported in the make.log? Might help.
Im using Kali Linux 2017.1

This is my info

Code: Select all

root@kali:~# uname -a
Linux kali 4.4.50-v7 #1 SMP Fri Apr 21 01:18:29 CDT 2017 armv7l GNU/Linux

Code: Select all

root@kali:~# lsusb
Bus 001 Device 007: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter

Code: Select all

root@kali:~# cat /proc/version
Linux version 4.4.50-v7 (root@builder) (gcc version 4.8.3 20140401 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2014.04 - Linaro GCC 4.8-2014.04) ) #1 SMP Fri Apr 21 01:18:29 CDT 2017

Code: Select all

root@kali:~# gcc --version
gcc (Debian 6.3.0-18) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Here I did what this post said

Code: Select all

root@kali:~# sudo wget http://fars-robotics.net/install-wifi -O /usr/bin/install-wifi
--2017-08-02 02:08:38--  http://fars-robotics.net/install-wifi
Resolving fars-robotics.net (fars-robotics.net)... 212.23.8.80
Connecting to fars-robotics.net (fars-robotics.net)|212.23.8.80|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 16141 (16K) [text/plain]
Saving to: ‘/usr/bin/install-wifi’

/usr/bin/install-wi 100%[===================>]  15.76K  53.4KB/s    in 0.3s    

2017-08-02 02:08:39 (53.4 KB/s) - ‘/usr/bin/install-wifi’ saved [16141/16141]

root@kali:~# sudo chmod +x /usr/bin/install-wifi
root@kali:~# sudo install-wifi -h

 *** Raspberry Pi wifi driver installer by MrEngman.
 *** Performing self-update
/usr/bin/install-wifi: line 19: curl: command not found
 !!! Failed to download update for install-wifi!
 !!! Make sure you have ca-certificates installed and that the time is set correctly
Please help me, I have two weeks trying :(
The scripts I have and drivers I've compiled are for Raspbian so probably will not work with Kali. The error you get when trying to run my script shows command curl is not installed. However, even if you install curl to get the script working It will report the is no driver available for 4.4.50-v7 #1.
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Aug 07, 2017 11:18 am

Karmus wrote:
Mon Aug 07, 2017 6:36 am
Although not the Raspberry, I have issues with compiling for the platform aarch64, even though I have installed headers. It cannot find the correct folders in build/arch, and when I change the architecture to arm64, it shows some other errors.

Code: Select all

osmc@osmc:/home/osmc# uname -a
Linux osmc 3.14.29-28-osmc #1 SMP Tue Aug 1 00:00:14 UTC 2017 aarch64 GNU/Linux
I know you probably don't have time to debug this, nevertheless, I just wanted to reach out to an expert on this particular chipset. Tremendously many people have issues with this driver. I would really want to look for an alternative in stead of messing around with old code.
Perhaps if you report exactly what the error is regarding the folders it might be possible to figure out a solution.

Mind you as you are not using a Raspberry might be better looking at the aarch64 forums or whatever.
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

mlazar
Posts: 1
Joined: Mon Oct 29, 2012 10:08 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Sat Aug 12, 2017 7:39 pm

Hello,

I need 8192eu.ko module for an old kernel 3.18.11-v7+ #781. But wget http://www.fars-robotics.net/8192eu-3.1 ... 781.tar.gz give me "ERROR 404: Not Found". :( I tried also https://dl.dropboxusercontent.com/u/802 ... 781.tar.gz and http://www.fars-robotics.net/8192eu-20150406.tar.gz without success. Is this driver available?

Thank You.

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Sun Aug 13, 2017 5:07 am

Should be available now. Try this

Code: Select all

wget http://www.fars-robotics.net/8192eu-3.18.11-v7-781.tar.gz
tar xzf 8192eu-3.18.11-v7-781.tar.gz
./install.sh
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

leobel96
Posts: 4
Joined: Thu Sep 08, 2016 3:54 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Sun Aug 13, 2017 7:35 pm

Hello to all,
I have just bought a tenda U1 WI-FI dongle that is based on the realtek RTL8192EU. The dongle works perfectly on my Windows pc but I have found problems with my Raspberry Pi 2 with the last version of OctoPi (an OS based on Raspbian Lite). With uname I obtain:
uname.PNG
uname.PNG (3.51 KiB) Viewed 1271 times
I have tried installing the drivers as suggested:
install.PNG
install.PNG (26.41 KiB) Viewed 1271 times
But, after rebooting more and more times and after have tried different versions of the drivers, I continue to obtain this result running the lsusb command:
lsusb.PNG
lsusb.PNG (11.9 KiB) Viewed 1271 times
The dongle led doesn't switch on and without an Ethernet cable or another dongle it's impossible to connect the Raspberry to internet.
What could be the problem? The procedure should be the same of a normal raspbian OS.
Thank you!

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Aug 14, 2017 2:40 pm

I'm currently abroad away from home, but when at home I run a couple of Pis with two wifi dongles one of which uses the 8192eu driver and I don't have any problems.

I have a Pi 3B with me and have just connected a wifi using the 8192eu driver and it is working OK.

Could it be an issue with your wifi configuration? If both wifi dongles are connected directly to the Pi could it be a power supply issue. Do you see any obvious errors in dmesg.

What do the following commands show

Code: Select all

lsmod
cat /etc/network/interfaces
sudo cat /etc/wpa_supplicant/wpa_supplicant.con
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

leobel96
Posts: 4
Joined: Thu Sep 08, 2016 3:54 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Mon Aug 14, 2017 2:53 pm

In the end I found another wifi adapter at home and decided to use or. It worked succesfully when I plugged it in. Thank you for your reply anyway

ewaldc
Posts: 3
Joined: Wed Aug 16, 2017 12:52 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Wed Aug 16, 2017 1:21 pm

Flawless installation on 4.9.35+ #1014. Many thanks for the pre-compiled driver and creating such an easy installation process !
While I am experienced in writing kernel code and compiling kernels, this saved me at least one hour of work.
One (minor) suggestion maybe for the installation script: "/etc/modprobe.d/8192eu.conf" is installed with pi as owner/group.
No big deal given the way the pi user is used in Raspbian, but to make it perfect:

Code: Select all

sudo chown root:root /etc/modprobe.d/8192eu.conf
Ewald

ewaldc
Posts: 3
Joined: Wed Aug 16, 2017 12:52 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Thu Aug 17, 2017 11:57 am

I was forced to upgrade due to a rpi kernel bug.
Is there a version for 4.9.43+ #1026?

Thanks in advance,
Ewald.

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Thu Aug 17, 2017 1:19 pm

Yes
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

ewaldc
Posts: 3
Joined: Wed Aug 16, 2017 12:52 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Sat Aug 19, 2017 12:33 pm

Thank you. Perfect installation on both v6L and v7 versions 4.9.43+ #1026.
My problem is solved on this kernel so I will stay on it for a while and not disturb you with requests for new versions.
Ewald

eleroux22
Posts: 1
Joined: Sat Oct 07, 2017 7:17 pm

Re: Realtek RTL8192EU ID 0BDA:818B

Sat Oct 07, 2017 7:20 pm

Any drivers available for Linux kali Kernel 4.4.50?

MrEngman
Posts: 3562
Joined: Fri Feb 03, 2012 2:17 pm
Location: Southampton, UK

Re: Realtek RTL8192EU ID 0BDA:818B

Sun Oct 08, 2017 6:51 am

eleroux22 wrote:
Sat Oct 07, 2017 7:20 pm
Any drivers available for Linux kali Kernel 4.4.50?
Sorry, no.
Simplicity is a prerequisite for reliability. Edsger W. Dijkstra

Please post ALL technical questions on the forum. Please Do Not send private messages.

Return to “Add-ons”

Who is online

Users browsing this forum: No registered users and 4 guests