Page 1 of 1

HDMI control.

Posted: Sat Oct 05, 2013 8:54 pm
by Cancelor
My Pi is working fine, when I power it on it also brings the connected TV out of standby.

After loading Rasbian is it possible to reproduce the signal that does this?

i.e. if the RPi is running 24/7 can I use the RPi to bring the TV out of standby? (TV was placed in standby with 'power' button in remote control)

Re: HDMI control.

Posted: Sat Oct 05, 2013 9:18 pm
by Oakham ... _over_HDMI

You may need to copy and paste the url

Re: HDMI control.

Posted: Sun Oct 06, 2013 9:56 pm
by Cancelor
cool, thnx, done lots of reading, followed all the links** and got a power on :)

** especialy this one > ... up-command

Re: HDMI control.

Posted: Mon Oct 07, 2013 9:33 am
by Cancelor
Humph! spoke too soon, it seems to power up with the other HDMI input active!?

Even if I swap cables and inputs.

It's just the same when I power up the RPi so I'm going to blame the fairly old TV.