Velek
Posts: 2
Joined: Tue Jan 14, 2020 10:31 am

RPi4 fails to twiddle GPIOs with dotnet 3.1.100

Thu Jan 16, 2020 3:06 am

I'm trying to make these example programs work:
https://darenmay.com/blog/net-core-and- ... -and-gpio/
I'm using the latest Raspbian and dotnet 3.1.100.
The programs run, but the LEDs won't blink.
I've double checked that the 3.3v and 5v pins are pushing out the right voltage, so my cable should be on right.
Also, my LED goes on when I touch the wire to a ground pin.

Velek
Posts: 2
Joined: Tue Jan 14, 2020 10:31 am

Re: RPi4 fails to twiddle GPIOs with dotnet 3.1.100

Sun Jan 19, 2020 4:31 am

I got it. I had to do an "sudo apt update && sudo apt upgrade".

Return to “Interfacing (DSI, CSI, I2C, etc.)”