mjanssen
Posts: 2
Joined: Wed Oct 12, 2016 8:37 pm

NRF24L01 on GPIO

Thu Oct 12, 2017 10:31 pm

Hi!

I connected a NRF24L01 on the GPIO of my RaspBerry Pi 3B, using this page:

https://www.raspberrypi.org/magpi/pi-mi-light/

It all seems to be connected correctly, but whatever I do with my Mi-Light, nothing is detected when in listening mode. When I run a test with another program/script, it shows no errors if communicating with the NRF24L01, when all is connected and shows an error when I disconnect a wire.

I use the 2,4Ghz WiFi iBox to control the lights through the Mi-Light app and that works like it is supposed to.

The NRF24L01 should pick up the signal from the iBox right? Or only from the remote control, which I don't have.

Any thought are very welcome.

With kind regards,

Martijn

mjanssen
Posts: 2
Joined: Wed Oct 12, 2016 8:37 pm

Re: NRF24L01 on GPIO

Sat Oct 21, 2017 9:07 am

Anybody ?

Return to “Interfacing (DSI, CSI, I2C, etc.)”

Who is online

Users browsing this forum: No registered users and 16 guests