User avatar
scottchiefbaker
Posts: 20
Joined: Tue Jan 10, 2012 9:52 pm
Location: Canby, OR
Contact: Website

Simple schematic of the GPIO pin out

Thu Aug 02, 2012 10:51 pm

I wanted to check the GPIO capabilities of my pi but I couldn't find any good diagrams so I made my own. I thought I'd post it, in case it could help someone else. SVG available upon request.

Image

User avatar
Grumpy Mike
Posts: 873
Joined: Sat Sep 10, 2011 7:49 pm
Location: Manchester (England England)
Contact: Website

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 8:33 am


pjc123
Posts: 911
Joined: Thu Mar 29, 2012 3:37 pm

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 11:46 am

And if you need more details:

http://elinux.org/RPi_BCM2835_GPIOs
My Raspberry Pi Project Page:
http://www.flaminghellmet.com/launch/

User avatar
scottchiefbaker
Posts: 20
Joined: Tue Jan 10, 2012 9:52 pm
Location: Canby, OR
Contact: Website

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 2:34 pm

I hadn't seen the details. That's great, thanks!

User avatar
Burngate
Posts: 4928
Joined: Thu Sep 29, 2011 4:34 pm
Location: Berkshire UK
Contact: Website

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 3:15 pm

As the original artist* of the wiki one, I have to say I like yours, particularly as you've managed to put in the video socket and SD card for reference.

*stretching the definition of artist

User avatar
scottchiefbaker
Posts: 20
Joined: Tue Jan 10, 2012 9:52 pm
Location: Canby, OR
Contact: Website

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 3:28 pm

The primary reason I did my own, was because I wasn't 100% sure which way to orient my Pi based on the wiki one. Time permitting I'll do another one, with the UARTs and other specialty pins labeled more like the wiki one.

User avatar
Burngate
Posts: 4928
Joined: Thu Sep 29, 2011 4:34 pm
Location: Berkshire UK
Contact: Website

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 4:18 pm

scottchiefbaker wrote:The primary reason I did my own, was because I wasn't 100% sure which way to orient my Pi based on the wiki one. Time permitting I'll do another one, with the UARTs and other specialty pins labeled more like the wiki one.
Yeah go for it :D

User avatar
MattHawkinsUK
Posts: 533
Joined: Tue Jan 10, 2012 8:48 pm
Location: UK
Contact: Website

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 4:21 pm

Excellent diagram and good to see proper GPIO references.

I created this one :
http://www.raspberrypi-spy.co.uk/2012/0 ... -and-pins/
but didn't think to make it obvious which way round it was other than P1 is marked on the Pi itself ... but many people may not stop to notice that!

Are you going to host your diagram anywhere? Wouldn't mind linking to it as it is a good alternative for people.
My Raspberry Pi blog and home of the BerryClip Add-on board : http://www.raspberrypi-spy.co.uk/
Follow me on Google+, Facebook, Pinterest and Twitter (@RPiSpy)

Joefish
Posts: 95
Joined: Wed Jan 25, 2012 10:31 am

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 4:27 pm

scottchiefbaker - nice.

User avatar
scottchiefbaker
Posts: 20
Joined: Tue Jan 10, 2012 9:52 pm
Location: Canby, OR
Contact: Website

Re: Simple schematic of the GPIO pin out

Fri Aug 03, 2012 8:31 pm

The 800px wide one and the full size one are hosted on my site:

800px: http://www.perturb.org/images/ec/gpio-pins-800.png
Fullsize: http://www.perturb.org/images/ec/gpio-pins.png

User avatar
AndreMiller
Posts: 8
Joined: Mon Jul 16, 2012 1:42 pm
Location: South Africa
Contact: Website

Re: Simple schematic of the GPIO pin out

Sun Jan 20, 2013 3:01 pm

I was messing around with Google Docs's Draw app, so here's yet another one:

Image

The table explaining each pin is here: http://www.andremiller.net/content/rasp ... ut-diagram

Return to “Interfacing (DSI, CSI, I2C, etc.)”

Who is online

Users browsing this forum: No registered users and 20 guests