Currently working on my prototype and I realised that the zero cam fish eye lens's ribbon cable is shorter than what I require and want to be able to extend it.
I've already created a custom board that uses the Pi zero Camera connector and have also created an camera extender board which uses 2 of the Pi zero camera connectors. All I'm simply looking the ribbon cable that will connect between the two camera port connectors.
I've seen online you can get ribbon cables that have the RPI Zero connector on 1 end and a RPI 1.3V connector on the other, see below:
https://shop.pimoroni.com/products/came ... ro-edition
However I've haven't been able to find a ribbon cable that has the RPI zero connector on both ends.
Does any one know if there is ribbon cable that is already out on the market that can support this or know of how I could make my own custom one be it in Autodesk Eagle or contacting a manufacture to have 1 assembled?