Page 1 of 1

DIN rail housing

Posted: Mon Jun 17, 2013 8:40 pm
by jraward
Hi all, first post here (or anywhere for anything Pi related).

I am looking to use a RPI as a mini web server for home automation based on a KNX system.

However for this I will need a RPI in a DIN rail housing in our distribution board.

I have found one project that hopes to achieve this: http://launch.dinpi.com/ but it hasn't launched yet else I would use that.

Without resorting to this: http://oceancontrols.com.au/KTG-254.html

Does anyone have any advice?

Thanks,
James

Re: DIN rail housing

Posted: Mon Jun 17, 2013 10:43 pm
by simonepanki
Hi i'm Simone form Italy,

i've found an empty din case like this http://www.italtronic.com/prod.asp?seg=2&cat=3&prod=21 sell from an italian store.

I'm also a system integrator, i work with knx but i'm new in raspberry wolrd. I was thinking the same thing as you: building a kns server but sincerely i have to figure it out yet.

Do you have already posted a discussion in the forum to show us the evolution of your project?

It will be great.

I hope my link was usefull!

Bye

Re: DIN rail housing

Posted: Sat Jun 22, 2013 12:38 pm
by mouramen
Not housing but I use this to attach de Pi's boxes to the DIN rail:
http://uk.rs-online.com/web/p/enclosure ... 4E4F4E4526

Re: DIN rail housing

Posted: Mon Jun 24, 2013 1:45 pm
by jhaas
You could also use something like this: http://www.newark.com/bud-industries/dn ... tt=DNC4796

Re: DIN rail housing

Posted: Sat Jul 06, 2013 6:06 pm
by projo
Try http://dk.rs-online.com/web/p/din-skinn ... or/7427285/ it's cheap and it works great.
Good luck

Re: DIN rail housing

Posted: Thu Sep 26, 2013 3:00 pm
by tarafisherhitaltech
Hi there, a slightly late reply but Hitaltech group offer a DIN Rail mounting enclosure produced specifically for the Raspberry Pi... please contact [email protected] for further information.

http://www.hitaltech.com/products-page/ ... pberry-pi/

Thanks!
Tara

Re: DIN rail housing

Posted: Mon Dec 09, 2013 10:37 am
by tarafisherhitaltech
The DIN Rail mounting enclosure for Raspberry Pi can be ordered now via CPC.

CPC are taking back orders via telephone with orders being delivered either just before the Christmas break/January 2014 (dependant on quantities)

CPC part number EN83317 - tel number 08447 88 00 88

Re: DIN rail housing

Posted: Thu Jan 02, 2014 4:30 pm
by tarafisherhitaltech
Now available to buy online the DIN Rail mounting enclosure to house the Raspberry Pi

http://cpc.farnell.com/hitaltech/25-041 ... 20Products

Re: DIN rail housing

Posted: Tue Jan 28, 2014 11:04 am
by lolg
@tarafisherhitaltech ยป Thu Jan 02, 2014 4:30 pm
Now available DIN Rail enclosure

Can DIN Rail enclosure cope with add on boards specifically Piface

Thanks
Lawrence

Re: DIN rail housing

Posted: Wed Mar 12, 2014 2:25 pm
by tarafisherhitaltech
Hi Lawrence

Apologies for the delayed response (I never received a notification of your comment!)

If you would like to email me [email protected] I can look into your request in more detail.

Thanks
Tara

Re: DIN rail housing

Posted: Mon Mar 17, 2014 11:49 am
by lolg
Tara have ordered one and yes the piface fit's but it's tight on getting cables out.

One bit of feedback it would be good for knock-outs for cables in top & bottom of enclosure.
Then it would be perfect for industrial/automation panel projects.

Lawrence

Re: DIN rail housing

Posted: Fri Mar 21, 2014 6:42 am
by yadom
The raspberry pi din rail enclosure is available from the Yadom Shop.
It's really nice for home automation or industrial project.
http://www.yadom.fr/home-page-products/ ... l-din.html

This enclosure is delivered with a transparent panel. An OLED display module that fits the panel should be availble soon.

Yannick

Re: DIN rail housing

Posted: Thu Dec 10, 2015 1:25 pm
by rPi3B
Here is one on Amazon http://amzn.com/B018J33308