Draven68
Posts: 33
Joined: Wed Jul 04, 2012 4:08 am

Element14 Case (Picture)

Mon Sep 17, 2012 10:14 am

Just received my case from Element14. $8.73 (AUD)

http://au.element14.com/multicomp/mc-rp ... /211379901

Fits pretty good.

Image

saggel
Posts: 8
Joined: Fri Sep 07, 2012 2:00 am

Re: Element14 Case (Picture)

Fri Sep 21, 2012 3:34 am

I have the same and I love it

halfluck
Posts: 13
Joined: Mon Sep 24, 2012 2:27 am

Re: Element14 Case (Picture)

Mon Sep 24, 2012 2:30 am

Hey Guys,

My Pi Arrived from Element 14 without a case so I used the box it came in.
Very secure and suits my needs

Image

Cheers Rob.

User avatar
poglad
Posts: 100
Joined: Tue Jul 31, 2012 8:47 am
Location: Aberdeen, Scotland
Contact: Website

Re: Element14 Case (Picture)

Mon Sep 24, 2012 8:30 am

Draven68 wrote:Just received my case from Element14. $8.73 (AUD)

http://au.element14.com/multicomp/mc-rp ... /211379901

Fits pretty good.

Image
Looks great! Is it firm/screwed together, or slightly loose like the Adafruit one?

fladdy
Posts: 7
Joined: Tue Sep 04, 2012 11:45 am

Re: Element14 Case (Picture)

Wed Sep 26, 2012 10:08 am

I'm looking to buy such a case (or similar one) from Germany as I'm in particular interested in a case which allows to be vertically mounted to a wall.

Any ideas where I cound get one or better two of them?

Draven68
Posts: 33
Joined: Wed Jul 04, 2012 4:08 am

Re: Element14 Case (Picture)

Thu Sep 27, 2012 3:03 am

The Element 14 case is a very snug fit... no board movement at all (I did the shake test and drop test on carpet.. and the board does not come loose)

Also, the case can be vertically mounted via 2 mounting slots underneath the case.

Image

User avatar
Dweeber
Posts: 606
Joined: Fri Aug 17, 2012 3:35 am
Location: Mesa, AZ
Contact: Website

Re: Element14 Case (Picture)

Thu Sep 27, 2012 3:17 am

Hard to tell... is there a way to get a cable out from the GPIO pins?
Dweeber A.K.A. Kevin...
My RPI Info Pages including Current Setup - http://rpi.tnet.com

Draven68
Posts: 33
Joined: Wed Jul 04, 2012 4:08 am

Re: Element14 Case (Picture)

Thu Sep 27, 2012 7:36 am

Dweeber wrote:Hard to tell... is there a way to get a cable out from the GPIO pins?
There's no slot or holes for the GPIO pins.

Which i'm fine with, as i use the Rpi as a Media Player...

If you plan on using the GPIO pins then i would recommend looking for a different case.

Return to “Other projects”