Page 1 of 1

CPC Case

Posted: Thu Sep 13, 2012 2:52 pm
by mikerr
Not seen it mentioned, but CPC / Farnell are now supplying Pi cases for just £5.51 in clear, black or white:

Image
http://cpc.farnell.com/jsp/search/produ ... &CMP=NLem1

(also included in their bundle for £39.99 - Pi /case / PSU / SD)
Image
http://cpc.farnell.com/raspberry-pi/rpi ... /SC1276464

Re: CPC Case

Posted: Thu Sep 13, 2012 3:43 pm
by respOnder
Nice!

Re: CPC Case

Posted: Thu Sep 13, 2012 4:04 pm
by Dweeber
Kind of what I am looking for the but US Farnell sites dont seem to have it yet. The cases you piece together are okay, but make it difficult to regain access to the actual board... you have to put them back together again. The only one they seem to have is the big red blob which is too large and doesn't look very good.

trying to find something like that that doesn't cost a lot for shipping ...

The one I got, took me more than 40 minutes to finally get it to go together.... Have not opened it since because I won't go through that again.

Re: CPC Case

Posted: Wed Sep 26, 2012 8:20 pm
by mikerr
They are now posting various other "forthcoming" cases on their facebook page:

http://www.facebook.com/cpc.co.uk

Case with 100mm VESA mount:

Image

And some others:
ImageImage
ImageImage @ £5.99

Re: CPC Case

Posted: Wed Sep 26, 2012 8:55 pm
by Dweeber
the Vesa mount one looks like you can have a GPIO cable out... The other ones do not or at least dont seem to.

Mis-marked on the solid color unit is the port speed... 10M is wrong. The Eth0 can only do 10/100 not 1000.

Re: CPC Case

Posted: Wed Sep 26, 2012 9:14 pm
by pygmy_giant
woo hoo - another box with holes in - at least its reasonably priced.

Show me a water-proof case or one you can stand on and I'll get excited.

Edit: apologies for my sarcasto-cortex (this is the socio-lobe speaking) - the little recess protecting the connectors looks handy and all those cases are good value for money.

I like these for a light-weight solution: http://www.ip-adelt.de/shop/raspberry-pi-case.html