i want to make my own case but i don't know how to secure the raspberry to the case, i was thinking about magnets but i don't know if that would be good to the device.
any suggestions?
PS- sorry for my english
Re: How to secure the raspberry Pi in the case
I used Sugru just as you would use bluetack. See www.sugru.com
It is a superb product and I have repaired the broken cases of accessories with it.
campi
It is a superb product and I have repaired the broken cases of accessories with it.
campi
Re: How to secure the raspberry Pi in the case
I mounted my Pi on small wooden rails. I just cut a slot with a wood saw for the PCB to sit in. Just glue or screw the rails to your case. See my case pics here http://www.raspberrypi.org/phpBB3/viewt ... 40&t=10078
-
RaTTuS
- Posts: 10709
- Joined: Tue Nov 29, 2011 11:12 am
- Location: North West UK
- Contact: Twitter YouTube
Re: How to secure the raspberry Pi in the case
magnets will not affect your RPI
it's not like a hard disk
it's not like a hard disk
How To ask Questions :- http://www.catb.org/esr/faqs/smart-questions.html
WARNING - some parts of this post may be erroneous YMMV
1QC43qbL5FySu2Pi51vGqKqxy3UiJgukSX
Covfefe
WARNING - some parts of this post may be erroneous YMMV
1QC43qbL5FySu2Pi51vGqKqxy3UiJgukSX
Covfefe