Raspberry Pi Forums

Posted: **Thu Oct 20, 2016 10:26 am**

Hello guys, this is going to be my first project and i really need help
So, i have Raspberry Pi 3, Breadboard, USB hub, powersupply, Male to female jumper cables, 1m RGB LED stripe, some more wires.
I have searched alot through internet and its really confusing for me because im really new to this kind of topic.
Do i need to buy USB speaker aswell or can i use some kind of aux input speaker?
Maybe you guys can find really good guide.

Thanks in advance
Flexx

Posted: **Thu Oct 20, 2016 10:57 am**

Hi and welcome to the forum.
It's been tried before -not sure of the current status however.
This link may help :
viewtopic.php?f=32&t=35838

Texy

Posted: **Thu Oct 20, 2016 11:18 am**

Yes, i see that RGB LEDs are connected to Arduino but i want RGB LED stripe to be connected with Raspberry Pi 3

Posted: **Thu Oct 20, 2016 12:23 pm**

Flexx wrote:Yes, i see that RGB LEDs are connected to Arduino but i want RGB LED stripe to be connected with Raspberry Pi 3

...it is connected to the Pi - re-read the thread I pointed too......

Raspberry Pi Forums

How to make RGB LED stripe pulse to music with Raspberry Pi3

How to make RGB LED stripe pulse to music with Raspberry Pi3

Re: How to make RGB LED stripe pulse to music with Raspberry

Re: How to make RGB LED stripe pulse to music with Raspberry

Re: How to make RGB LED stripe pulse to music with Raspberry