Posts: 17
Joined: Wed Oct 15, 2014 12:18 pm
Location: Cyprus
Contact: Website

Si4703 direct output

Sat Aug 06, 2016 9:22 pm

Hi folks :)

I got a Si4703 and I am wondering if it is possible to get the audio signal direct to the pi, via the GPIOs (I2C?). I don't want to use the cable output as I need the input of the USB sound card for the microphone. Does anybody know something about it?


User avatar
Posts: 343
Joined: Thu May 26, 2016 10:36 pm

Re: Si4703 direct output

Thu Aug 25, 2016 12:17 pm

Typically the i2c bus is used to set and read the chip's registers. Normally no way to get audio data reliably over i2c, unless it is low bit rate and the chip is setup to do that.

Discuss hearing, acoustics, audio injector products, - https://lists.audioinjector.net/mailman/listinfo/people
Sound card for the Raspberry Pi with inbuilt microphone : www.audioinjector.net
Audio Inector Octo multitrack GPIO sound card

Return to “Graphics, sound and multimedia”