tanteckyen
Posts: 2
Joined: Mon Nov 04, 2019 12:02 pm

Using Raspberry to receive data from Ti Launchpad (cc1350)

Mon Nov 04, 2019 12:06 pm

Hi guys,

I have an ongoing project that requires me to use the launchpad CC1350 in BLE mode to act as a transponder and beacon. The beacon will be placed in different parts of a building to act as patients in a hospital. My task is to get the transponder (868MHz) to detect these beacons and display the results on a raspberry PI 3. The transponder and Raspberry PI will be acting like its on a drone. My question is how do i get the raspberry PI to display all these info from the launchpad? Had anyone work with something like this before?

Cheers

blimpyway
Posts: 186
Joined: Mon Mar 19, 2018 1:18 pm

Re: Using Raspberry to receive data from Ti Launchpad (cc1350)

Wed Nov 06, 2019 8:38 am

From http://www.ti.com/product/CC1350 it seems it is just an ARM M3 controller with wireless capabilities.
So you could use I2C, UART, or even bluetooth or wifi to communicate with Pi and not only

tanteckyen
Posts: 2
Joined: Mon Nov 04, 2019 12:02 pm

Re: Using Raspberry to receive data from Ti Launchpad (cc1350)

Tue Dec 03, 2019 7:28 am

Oh cool, thanks so much!

Return to “Automation, sensing and robotics”