Posts: 28
Joined: Thu Sep 27, 2018 9:52 am

RaspAP WiFi Client AP Mode only 1 device can be connected

Wed Nov 04, 2020 4:50 am

Currently using Raspberry Pi Model 4B (1 GB RAM) and trying to configure it to be a hotspot and allow other raspberry pi connect to it.
I install RaspAP from this command:

Code: Select all

curl -sL | bash
Also followed this guide to setup WiFi Client AP Mode (

I can see the hotspot SSID showing up on other device, but only 1 device is able to connect at a time.
I tried to connect using my phone and laptop to the hotspot, but only the first device can connect and the second device couldn't connect to it.
If i disconnect the first device, the second device can connect to it.

I tried install RaspAP and do the same configuration on Raspberry Pi 3B+, and i can connect to the hotspot with more than 1 devices.

Anybody know what is going on with Raspberry Pi 4B that may cause only 1 device able to connect to its hotspot at a time?

Return to “Networking and servers”