Nodge
Posts: 39
Joined: Tue Jan 24, 2012 10:18 am

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 9:47 am

I've just tried r11212 and it's crashing when I stop a video playing (pressing "m" and clicking on the stop button). Each time it's refused to boot up afterwards. On the plus side it's seeing my external hard drive which an earlier build didn't.

itsonlyme
Posts: 124
Joined: Sun Feb 12, 2012 12:43 pm

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 10:19 am

I had the same issue as Nodge on 11203 when using TV Catchup addon. I have reverted to 11198 where, fingers crossed, it has not recurred. On reboot card for 11203 displays OpenElec Banner. That is as far as it gets.

Piminiuser
Posts: 73
Joined: Wed May 30, 2012 1:15 pm

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 11:28 am

sparky0815 wrote:Hey there :)

If u want 2 GB or 4 GB SD card images of r11212 (03.06.2012) you can download it from my blog...

http://bit.ly/MnBG7j

greetings :geek:

Thnx!! I downloaded the .img file from your blog :)

Whats the difference between the 2GB or 4GB version? I use a 16gb micro sd card.

Edit: Downloaded the 4gb version. But my pi wont boot. (16gb sd card)
Last edited by Piminiuser on Tue Jun 05, 2012 11:32 am, edited 1 time in total.

jasjeet
Posts: 90
Joined: Thu May 31, 2012 6:00 pm

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 11:31 am

Piminiuser wrote:
sparky0815 wrote:Hey there :)

If u want 2 GB or 4 GB SD card images of r11212 (03.06.2012) you can download it from my blog...

http://bit.ly/MnBG7j

greetings :geek:

Thnx!! I downloaded the .img file from your blog :)

Whats the difference between the 2GB or 4GB version? I use a 16gb micro sd card.
Nothing, just the storage partition is smaller, you can make it bigger yourself.

walleee
Posts: 80
Joined: Tue May 29, 2012 6:16 pm

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 2:26 pm

Would it be possible to have a slightly smaller than 2gb img file made up? my '2GB' cd card is 1875MB and the 2GB image just wont fit....

onetootreefor
Posts: 54
Joined: Wed May 30, 2012 12:21 am

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 3:23 pm

just built r11223 last night....audio passthrough issues still present im afraid. Im not sure if anyone is hearing our calls jasjeet!! hehe anyway. I have a 4gb img of r11223 if anyone is interested please let me know and ill post it.

Nodge
Posts: 39
Joined: Tue Jan 24, 2012 10:18 am

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 3:37 pm

Hi, I'd like to give your 4gb img of r11223 a try please.

Many thanks,
John

jasjeet
Posts: 90
Joined: Thu May 31, 2012 6:00 pm

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 3:37 pm

onetootreefor wrote:just built r11223 last night....audio passthrough issues still present im afraid. Im not sure if anyone is hearing our calls jasjeet!! hehe anyway. I have a 4gb img of r11223 if anyone is interested please let me know and ill post it.
dammit, i wasn just building my own as well in the hope Audio Passthrough was fixed but its still broken. Really important feature for me =(

I also tried Raspmbc RC last night, its quick but buggy as hell and again no Audio Passthrough.

I think some time when the audio engine was update they broke it, we dont see the Audio Output Passthrough option anymore either.

Nodge
Posts: 39
Joined: Tue Jan 24, 2012 10:18 am

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 3:40 pm

onetootreefor wrote:just built r11223 last night....audio passthrough issues still present im afraid. Im not sure if anyone is hearing our calls jasjeet!! hehe anyway. I have a 4gb img of r11223 if anyone is interested please let me know and ill post it.
Hi, I'd like to give your 4gb img of r11223 a try please.

Many thanks,
John

onetootreefor
Posts: 54
Joined: Wed May 30, 2012 12:21 am

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 3:59 pm

Nodge wrote: Hi, I'd like to give your 4gb img of r11223 a try please.

Many thanks,
John
sure no problem, there was an update added to the git overnight so im rebuilding to the most current build, shouldnt be more than an hour ill post a 4gb img here.

User avatar
sparky0815
Posts: 64
Joined: Mon May 21, 2012 4:52 pm
Location: Germany
Contact: Website

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 6:49 pm

walleee wrote:Would it be possible to have a slightly smaller than 2gb img file made up? my '2GB' cd card is 1875MB and the 2GB image just wont fit....
I uploaded an smaller Image for you ;) (size: 1,1GB)

http://sparky0815.de/2012/06/raspberry- ... ownloaden/

greetings :geek:
Twitter: @Sparky0815
Facebook Gruppe (RaspberryPi - Deutschland): http://on.fb.me/PnYE99
------------------------------------------------------------------------------------------------------------

onetootreefor
Posts: 54
Joined: Wed May 30, 2012 12:21 am

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 8:17 pm

sorry im so late (dropbox issues) but here is the r11225 4GB img compiled today: https://www.dropbox.com/s/jls1hf9plty1r ... img.tar.gz

as for audio pass through issues here's my message to the DEVS:

as of r11170 audio pass through was working FANTASTICALLY! almost every build after May 30th has trashed audio pass through. If it is enabled (ie DTS/AC3 capable receiver enabled) then it hands out PCM 2.0 stereo to the receiver and BUFFERS A LOT(most likely because its trying to decode on the raspi rather than the receiver). If you Disable DTS/AC3 capable receiver it still hands out PCM 2.0 stereo to the receiver but doesnt buffer nearly as much and makes viewing acceptable. If you need any help testing things please feel free to pm me. I try to idle in #openelec on irc as much as possible so you can reach me there too. Lets get this solved because the new builds have such speedy GUIs!

jasjeet
Posts: 90
Joined: Thu May 31, 2012 6:00 pm

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 9:05 pm

onetootreefor wrote:sorry im so late (dropbox issues) but here is the r11225 4GB img compiled today: https://www.dropbox.com/s/jls1hf9plty1r ... img.tar.gz

as for audio pass through issues here's my message to the DEVS:

as of r11170 audio pass through was working FANTASTICALLY! almost every build after May 30th has trashed audio pass through. If it is enabled (ie DTS/AC3 capable receiver enabled) then it hands out PCM 2.0 stereo to the receiver and BUFFERS A LOT(most likely because its trying to decode on the raspi rather than the receiver). If you Disable DTS/AC3 capable receiver it still hands out PCM 2.0 stereo to the receiver but doesnt buffer nearly as much and makes viewing acceptable. If you need any help testing things please feel free to pm me. I try to idle in #openelec on irc as much as possible so you can reach me there too. Lets get this solved because the new builds have such speedy GUIs!

I would also like to help with the Audio Passthrough, I have a HDMI 7.1 DD/DTS AV Receiver to test with.

arqcan
Posts: 8
Joined: Tue May 15, 2012 8:23 pm

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 11:02 pm

is anyone else having issues importing pre-existing libraries onto any of the r11193 or above builds? I select the file and nothing happens, been that way for a while now.

Nodge
Posts: 39
Joined: Tue Jan 24, 2012 10:18 am

Re: OpenELEC Testbuilds

Tue Jun 05, 2012 11:38 pm

onetootreefor wrote:sorry im so late (dropbox issues) but here is the r11225 4GB img compiled today: https://www.dropbox.com/s/jls1hf9plty1r ... img.tar.gz
Thanks for posting - downloading it now. I'll try it tomorrow.
Thanks,
John

User avatar
sparky0815
Posts: 64
Joined: Mon May 21, 2012 4:52 pm
Location: Germany
Contact: Website

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 12:37 am

Piminiuser wrote:
sparky0815 wrote:Hey there :)

If u want 2 GB or 4 GB SD card images of r11212 (03.06.2012) you can download it from my blog...

http://bit.ly/MnBG7j

greetings :geek:

Thnx!! I downloaded the .img file from your blog :)

Whats the difference between the 2GB or 4GB version? I use a 16gb micro sd card.

Edit: Downloaded the 4gb version. But my pi wont boot. (16gb sd card)

Hey Piminiuser,

please give me more informations about your sd card:
manufacturer:
typ:
class:
product number:

thanks for your help
Twitter: @Sparky0815
Facebook Gruppe (RaspberryPi - Deutschland): http://on.fb.me/PnYE99
------------------------------------------------------------------------------------------------------------

User avatar
sparky0815
Posts: 64
Joined: Mon May 21, 2012 4:52 pm
Location: Germany
Contact: Website

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 7:42 am

Good morning.

You can download the newest version of OpenELEC images for your RPi (2GB and 4GB).
=> build: r11225 (06.06.2012)

http://bit.ly/KgSvLW



If you Raspberry Pi don't boot:
Send me an PM with informations about your SD card. (manufacturer, class, size, model)
Thanks for your help an have fun ;)

Greetings :geek:
Twitter: @Sparky0815
Facebook Gruppe (RaspberryPi - Deutschland): http://on.fb.me/PnYE99
------------------------------------------------------------------------------------------------------------

nabla
Posts: 12
Joined: Tue May 29, 2012 10:00 pm

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 8:09 am

Can you try compiling a build with PVR?

dom
Raspberry Pi Engineer & Forum Moderator
Raspberry Pi Engineer & Forum Moderator
Posts: 5170
Joined: Wed Aug 17, 2011 7:41 pm
Location: Cambridge

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 8:50 am


sraue
Posts: 144
Joined: Tue Feb 28, 2012 12:36 am
Location: Switzerland
Contact: Website

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 8:52 am

:-) i know, new build later today

jasjeet
Posts: 90
Joined: Thu May 31, 2012 6:00 pm

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 10:01 am

sraue wrote:
:-) i know, new build later today
Thank you sraue you are seriously epic! :D :D :D

User avatar
ScoobyDoo
Posts: 108
Joined: Wed Apr 04, 2012 2:52 pm
Location: Staffordshire, UK

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 10:32 am

Excellent news, looking forward to someone posting a .img of the working pass thru build :)

tbar
Posts: 98
Joined: Thu Nov 24, 2011 6:10 am

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 10:36 am

No wonder why it didn't work.....

jasjeet
Posts: 90
Joined: Thu May 31, 2012 6:00 pm

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 10:37 am

tbar wrote:
No wonder why it didn't work.....
lol good its fixed though

normal
Posts: 61
Joined: Sun May 27, 2012 9:50 pm

Re: OpenELEC Testbuilds

Wed Jun 06, 2012 2:18 pm

The r11225 image works with my wireless card (RTL8912U) but the network info sheet doesn't show any IP information, it does connect to interet and sets the time and everything, but I can't see what IP it has.

Return to “Media centres”