You could try to set the sync to "audio clock" in settings, worked for me for the occasional stutter with in RPi DTS decoding.
The new 10950 build is very stable. No scrambled logo anymore. Still I haven't figured out how to make the video calibration correctly saved. On every reboot it's off. It's strange because the UI appears to have the overscan set correctly, it's just the skin pictures and while playing video goes off. It also loses overscan when playing an mpeg2 file with DVDplayer instead of OMXplayer. I tried setting the framebuffer and disable_overscan=1 in config.txt, didn't help.
dmesg log is also strange in this place
Code: Select all
[ 7.034505] mmcblk0: mmc0:1234 SA02G 1.83 GiB
[ 7.058806] mmcblk0: p1 p2
[ 7.119948] bcm2708_fb_check_var info(c72a3c00) 1280x720 (1280x720), 1843200, 16
[ 7.119972] bcm2708_fb_check_var var(c7303e30) 1024x768 (1280x720), 32, 460800
[ 7.119994] bcm2708_fb_set_par info(c72a3c00) 1024x768 (1280x768), 1843200, 32
[ 7.136573] BCM2708FB: start = c8a00000,49384000 width=1024, height=768, bpp=32, pitch=0 size=1843200 success=16
[ 7.136592] detected fb_set_par error, error code: 16
If somebody figured this out please post the solution.