spazam
Posts: 1
Joined: Sun Oct 29, 2017 1:49 pm

IR receiver get non-stop pulse/space

Sun Oct 29, 2017 2:07 pm

Hello guys,

I'm trying to use my Raspberry-Pi 3 B+ as air-conditioner controller.
I looked at every possible guide
(https://www.hackster.io/austin-stanton/ ... irc-2fd581),
(http://www.instructables.com/id/Zero-to ... aspberry-/),

the connection of the cables is quite simple. I decided to use the default GPIO PIN number 18.

I added this to /etc/modules:
lirc_dev
lirc_rpi

And this to /boot/config.txt:
dtoverlay=lirc-rpi

And copied all the configuration that there is in the guide for /etc/lirc/hardware.conf.

And I stopped both services:
systemctl stop lircd.service
systemctl stop lircd.socket

But the problem is that I get a non-stop pulse/space, and I even not pressed any button !
What is the problem ?

Return to “Media centres”

Who is online

Users browsing this forum: No registered users and 11 guests