SqueezePlug & Max2Play announcement:
New SqueezePlug Version available
G R E A T N E W S !
SqueezePlug & Max2Play are very happy to tell you, that SqueezePlug is now available in a complete new Web based version!
SqueezePlug & Max2Play is the new combination of SqueezePlug, the famous Multiroom Audio Solution and Max2Play, the web based framework for controlling Linux based Mini-Computer like e.g. Raspberry Pi, Odroid and others by a simple web interface without any, absolutely any Linux Know-How. SqueezePlug is now a plug-in in Max2Play to make the configuration as easy as possible. There is no need for connecting a monitor, a keyboard or a mouse on the device itself. It all runs headless and no special tools like Putty are needed any more. The configuration is as simple as configuring a router from a web interface!
The new name for this famous Multiroom Audio Solution is "SqueezePlug & MAX2Play".
SqueezePlug & Max2Play worked very hard the last month to build this new version of an easy to use Multiroom Audio Solution so give it a try and you will be fascinated!
In this first version, SqueezePlug & Max2Play is available for Raspberry Pi and the Odroid devices U3 and C1. Versions for other devices will follow!
What is SqueezePlug & Max2Play?
SqueezePlug & Max2Play is a Multiroom Audio Solution with server and player components. Multiroom Audio Solution means, that you have one server and as much players as you like. Every player uses the shared music from the server. Players can be synced to play the same music, or they can play different music. A Mini-Computer can be a server, a player or a server and a player together. The files can resist on the Mini-Computer itself e.g. on an directly attached USB-HD or on another location on your network. A Mini-Computer doesn't make any noise, cause it don't have any cooling components and consumes very little power.
Available server components on SqueezePlug & Max2Play:
- Logitech Media Server (SlimServer, SqueezeCenter, Squeezebox Server)
- Kodi (XBMC)
Available player components:
- ShairPort (AirPlay)
- gmediaplayer (DLNA Client)
All these servers and players are ready to run by just a click.
Included features are:
- graphical Equalizer
- Lowpassfilter and Crossfeed
- ShairPort Sync for synchronization between different ShairPort players
- mount USB-drives automatically
- mount Samba and NFS network shares
- Samba Server
- HD-Idle to power down your attached USB-HD
- Update functions
- install other plugins by just a click
-- Raspberry Pi (all types, best: Raspberry Pi 2 Model B), or Odroid U3, or Odroid C1
-- Other devices will be supported in future
-- SD-Card minimum 8 GB (Class 10 is recommended)
-- Optional: Raspberry Pi I2S Soundcard. We recommend the IQaudIO Card Pi-DAC+. This card from our experiences is the best Soundcard you can get for the Raspberry Pi. The Pi-DAC+ Card runs with SqueezePlug & MAX2Play out of the box. There are no modifications necessary. The Sound will inspire you! More information you will get here: http://iqaudio.com
-- Optional: USB Soundcard
-- Optional: WiFi-Adaptor, Keyboard, Mouse, and other peripheral devices
Please always use an appropriate power supply to power your Mini-Computer! Insufficient power supplies can be the reason for many problems!
-- Tool for writing SD-Cards (if you use Raspberry Pi as your platform for SqueezePlug & MAX2Play you don't even need this, you can use NOOBS)
-- Web browser
-- No other software is needed!!!
How to get it working
There are only a few steps necessary to get your Mini-Computer working as an easy to use Multiroom Audio Solution. Follow the next steps and you will be ready to go in a few minutes. If your Mini-Computer is already running, you can start with step 5. "Expand the SD-Card".
1. Download the latest SqueezePlug & Max2Play SD-Card Image
Go to SqueezePlug Downloads or Max2Play Downloads to get the latest version of SqueezePlug & Max2Play. Download and save it to your PC.
2. Burn the image to the SD-Card
Use a tool like USB Image Tool to burn the downloaded image to the SD-Card. It is also possible to get a ready to start image from our shop: Max2Play Shop. If you are using a Raspberry Pi, you can simply drop the extracted files from the archive to the FAT-formatted SD-Card. This method is called NOOBS-installation.
3. Start your Mini-Computer
Put in the SD-Card (or eMMC on Odroid), connect the LAN-Cable and the power supply to your Mini-Computer and boot it up. If you use the NOOBS-installation method with the Raspberry Pi, the system will be prepared automatically. Watch the process from your attached monitor or wait for about 20 minutes to finish the process. If you use this method you also have the advantage of a discovery system. On boot you can press <Shift> to start the recovery-system. You can choose to install a new clean system with factory settings from here.
4. Connect to your Mini-Computer by a web browser
" in the address bar of your web browser. If the SqueezePlug & Max2Play site does not start up, try to connect via the IP-Address. For that you will need to know this address. Look it up in your router or use a tool like Advanced IP Scanner. If you are not able to connect either ways, connect a monitor and a keyboard to the Mini-Computer, log in and type "ifconfig". The login is different for the different Mini-Computers (e.g. use user "pi" and password "raspberry" on the Raspberry Pi, user "odroid" and password "odroid" on the Odroid devices.)
5. Expand the SD-Card (not needed for NOOBS-Raspberry PI Image)
To get use of the full space of the SD-Card you have to expand it. Remember that the minimum size is 8 GB. Even if your card is a 8 GB card, please expand the card, before doing something else. Otherwise you will run out of space immediately. To expand the card choose the "SETTINGS / REBOOT" menu, go to the section "Reboot / Update / Filesystem Settings" and click on "Expand Filesystem". Afterwards please reboot to take effect!
6. Do some basic configuration
After rebooting has finished, go back to the "SETTINGS / REBOOT" menu. From here you should be able to configure the basic settings. Everything you need is explained here. It is always a good idea to update the system from here. The necessary plug-ins for SqueezePlug are already installed, choose others if you like.
7. Configure the network settings
Choose the "WIFI / LAN" menu to configure your network settings. SqueezePlug & Max2Play uses the wired connection with DHCP by default. This means that you will get an IP-Address from your router while booting, if DHCP on the router is enabled. A LAN-Connection is always necessary on the first boot. If you like, you can configure a additional WLAN (WiFi)-Connection. If the WLAN-Connection is working, you can simply cut the LAN-Connection. Please remember, the IP-Address will change if you connect by WiFi instead of LAN.
8. Configure the path to your files
Choose the "FILESYSTEM MOUNT" menu to configure the path to your Media-Files like music, movies, pictures etc. Your Media-Files can be saved at different locations: On the SD-Card of the Mini-Computer itself, on an attached USB-drive, or on a Samba or NFS Network-Share. If the Media-Files are stored on the SD-Card you booted from, there is no need to do anything here. If it is stored on a USB-drive this will be mounted automatically to /media/usb and /media/usb0. If you attach more than one USB-drive, they will be mounted to /media/usb1 to /media/usb7. If your Media-Files are stored on an network location you have to configure it from this site. Everything you will need to do is explained here. If you like to enable the Mini-Computer to work as a Samba-Server, go to the section "Sambashares on Max2Play - setup network share paths". If configured correctly, you are now able to see your Mini-Computer as a network-share form the PCs in your home LAN. You can now easily transfer files to your Mini-Computer from other computers in your Home-LAN.
9. Install Squeezebox Server
If you like, you can install Squeezebox Server. Squeezebox Server is one of the best Media-Servers you can get. Choose the Menu " SQUEEZEBOX SERVER " and you will find all you need to get Squeezebox Server installed. Please remember, that it will take a while, till the Squeezebox Server webinterface is reachable after the installation. After the installation has finished, you can access the Squeezebox Server web interface by choosing "Start Squeezebox Server Webadministration". One of the first things you have to configure here is the path to your media files. Please choose the path depending on the settings in the earlier steps. Squeezebox Server stands for: Logitech Media Server, SlimServer, SqueezeCenter and Squeezebox Server.
10. Configure AudioPlayer
To configure you Mini-Computer as an AudioPlayer choose the menu "AUDIOPLAYER". From here you can configure three different players. For the Squeezebox Server environment you need the SqueezeLite player. To play from your Apple-Devices you need ShairPort. The gmediarender is a DLNA-Client for audio running with all DLNA compatible media-servers. All the players can run simultaneously. Please configure the appropriate soundcard for your system. To change the name of your player, choose the menu "SETTINGS / REBOOT" and you will find an option to change it. Please remember, that you will not only change the player name, you will also change the hostname of your Mini-Computer. So the URL for your Mini-Computer will also change.
11. Additional Settings
There are a lot of other settings or tweaks you can choose from the menus. E.g. if you like install Kodi (f.k.a. XBMC). It can easily coexist with Squeezebox Server and all other components of SqueezePlug & Max2Play.
A Video Tutorial will follow soon, be patient for some days, thank you!
Questions concerning this project? Please refer to Shop.Max2Play or SqueezePlug.
Please remember that you use free software. If you like SqueezePlug & MAX2Play we are happy to receive a Donation. Go to: SqueezePlug Donation. Thanks a lot.
Thomas & Stefan