I'm new to the raspberry scene, so I'm hoping this is rookie mistake somewhere in the settings, but I'm not too sure. Hence I'm here and asking for a second opinion.
My set up is the following:
- Raspberry Pi 3 Model B
- New LCD Controller board kit for 15"6-screens
- New laptop screen (15"6 inch)
- HDMI Connected
When I'm on the homescreen and anything else, all the colors look off. I'm not sure if this is due to a faulty setting or that there is a problem within my controller board or perhaps a faulty wire/cable. And before I start buying new parts (and wait a couple of week on shipping) I would like to make sure I'm replacing the good parts, instead of ending up with two of everything and still the same issue.
I've already tried the HDMI_Boost setting, framebuffer_depth = 24, update and upgrade the entire raspberry through console, but nothing seems to do the trick.
I've attached a few pictures to better show my problem.
So basically my question is: what is causing this problem?
Wrong/faulty lcd-board, wrong cable, or perhaps a wrong voltage/ampere?
Hope someone can help,
Thanks in advance,