A3Holle
Posts: 1
Joined: Sun May 19, 2019 8:59 am

Servo control in mono file on raspberry PI 3

Sun May 19, 2019 9:20 am

Hello,

I'm trying to make a GUI that will run in Mono on my Raspberry PI 3.

I want to control a servo (SG90) with buttons in my GUI.

With the "Start" button the servo has to move to the max. position and stay in that position.

When I push the "Stop"button the servo has to move to the nutral position.

With the "Pulse" button the servo has to move to the max. position as long as I push the "Pulse" button and has to return to nutral when I release the button.
Attachments
2019-05-18 14_53_03-Window.png
2019-05-18 14_53_03-Window.png (36.42 KiB) Viewed 739 times

Return to “C/C++”