Raspberry Pi Forums

Code: Select all

HOST = "127.0.0.1"
PORT = 4223
UID = "jNw"

from Tkinter import *
from tinkerforge.ip_connection import IPConnection
from tinkerforge.bricklet_remote_switch import RemoteSwitch
import os
master = Tk()

master.title("GUI")

w = Canvas(master, width=300, height=200)
w.pack()

def shutdown():
    os.system("sudo shutdown -h now")

def reboot():
    os.system("sudo shutdown -r now")

def light_on():
    if __name__ == "__main__":
    ipcon = IPConnection() # Create IP connection
    rs = RemoteSwitch(UID, ipcon) # Create device object

    ipcon.connect(HOST, PORT) # Connect to brickd
    # Don't use device before ipcon is connected

    # Switch socket with house code 17 and receiver code 1 on.
    # House code 17 is 10001 in binary (least-significant bit first)
    # and means that the DIP switches 1 and 5 are on and 2-4 are off.
    # Receiver code 1 is 10000 in binary (least-significant bit first)
    # and means that the DIP switch A is on and B-E are off.
    rs.switch_socket_b(1, 1, RemoteSwitch.SWITCH_TO_ON)

def light_off():
    if __name__ == "__main__":
    ipcon = IPConnection() # Create IP connection
    rs = RemoteSwitch(UID, ipcon) # Create device object

    ipcon.connect(HOST, PORT) # Connect to brickd
    # Don't use device before ipcon is connected

    # Switch socket with house code 17 and receiver code 1 on.
    # House code 17 is 10001 in binary (least-significant bit first)
    # and means that the DIP switches 1 and 5 are on and 2-4 are off.
    # Receiver code 1 is 10000 in binary (least-significant bit first)
    # and means that the DIP switch A is on and B-E are off.
    rs.switch_socket_b(1, 1, RemoteSwitch.SWITCH_TO_OFF)

b=Button(master, text= "Shutdown", command=shutdown)
b.pack()

b=Button(master, text= "Reboot", command=reboot)
b.pack()

b=Button(master, text= "Licht an", command=light_on)
b.pack()

b=Button(master, text= "Licht aus", command=light_off)
b.pack()

mainloop()