Page 1 of 1

Morse Code and GPIO

Posted: Sun Nov 11, 2012 7:12 pm
by fdion
At PyCarolinas back in october, I demoed some interesting use of Morse code with GPIOs. I'll have some hardware build instructions posted sooner or later, but in the interim, for those who are interested in looking at the code (and installing RPi.GPIO if you haven't done it yet) and in reading an explanation of the way to generate the Morse dot and dashes, will find this article of interest: ... -dash.html

It also has a list of no less than 42 interesting projects that can be derived from this.


Re: Morse Code and GPIO

Posted: Mon Nov 12, 2012 10:05 am
by alexeames
Anyone with a recent Raspbian image (Sept/Oct) will have RPi.GPIO already installed. Might be worth noting that on your blog too Francois :D

Re: Morse Code and GPIO

Posted: Tue Nov 13, 2012 12:28 pm
by fdion
I'll add a comment. The instructions are there to make sure that readers know how to get the latest version, that it be through easy_install (or pip) or through the apt-get process.

Back to Python, anybody doing something interesting with the code I posted?