project 001 servo multiway controller
Posted: Wed Jul 01, 2015 10:39 pm
Hi all im new here so please bare with me.
I've just ordered myself my first raspberry pi 2.
I am wanting to use it in my car for running a folding screen and also as a media source centre.
The first thing I need to make the pi run is a small 6v dc motor which will need to have the feel as if it was fitted in the car as a standard fitting.
I have a mechanism that flips over a hidden screen but I need to know how to program the pi to be able to do it in various ways. These ways include
1, to open up and have end limit controls at the Single press of a button.
2, close at the press of a button and have a end limit.
3, to automatically open (if closed) when the reverse camera is activated and close again automatically when camera is deactivated.
4, if the screen is already open the camera must not close the screen if it was already open prior to the camera being activated.
5, automatically close the screen when the cars ignition is turned off.
Is this possible to do with the pi 2 and if so can anyone please tell me what additional circuit boards I will need to aquire to do this.
I hope I have explained what it is I'm hoping to achieve from my raspberry pi 2 and any help is greatly appreciated.
I've just ordered myself my first raspberry pi 2.
I am wanting to use it in my car for running a folding screen and also as a media source centre.
The first thing I need to make the pi run is a small 6v dc motor which will need to have the feel as if it was fitted in the car as a standard fitting.
I have a mechanism that flips over a hidden screen but I need to know how to program the pi to be able to do it in various ways. These ways include
1, to open up and have end limit controls at the Single press of a button.
2, close at the press of a button and have a end limit.
3, to automatically open (if closed) when the reverse camera is activated and close again automatically when camera is deactivated.
4, if the screen is already open the camera must not close the screen if it was already open prior to the camera being activated.
5, automatically close the screen when the cars ignition is turned off.
Is this possible to do with the pi 2 and if so can anyone please tell me what additional circuit boards I will need to aquire to do this.
I hope I have explained what it is I'm hoping to achieve from my raspberry pi 2 and any help is greatly appreciated.