I am want to do some time lapse photography with a GoPro. Specifically I want to be able to turn the camera on and off and take single shots. There is a usb cable with an FTDI chip that can probably do this, but the Pi will be some distance from the GoPro, so Wifi is preferable.
I can't find any documentation on how to use the WiFi interface on the GoPro, although I can connect to it OK. Does anyone have any pointers, or know of similar projects?
-
geekinthesticks
- Posts: 93
- Joined: Fri Feb 08, 2013 7:22 pm
-
fruitoftheloom
- Posts: 18553
- Joined: Tue Mar 25, 2014 12:40 pm
Re: Controlling a GoPro Via Wifi.
http://www.raspberrypi.org/forums/viewt ... 9&p=584544
http://www.raspberrypi.org/forums/viewt ... 4&p=581040
http://www.raspberrypi.org/forums/viewt ... 4&p=581040
adieu
My other Computer is an Asus CS10 ChromeBit
My other Computer is an Asus CS10 ChromeBit
-
geekinthesticks
- Posts: 93
- Joined: Fri Feb 08, 2013 7:22 pm
Re: Controlling a GoPro Via Wifi.
Thanks. I have managed to find a few useful pages showing how to control the GoPro over Wifi using http GET commands:
https://github.com/KonradIT/goprowifihack
http://hackaday.com/2014/06/20/pwn-your ... s-hacking/
http://www.reddit.com/r/goprodiy/commen ... nstraints/
https://github.com/KonradIT/goprowifihack
http://hackaday.com/2014/06/20/pwn-your ... s-hacking/
http://www.reddit.com/r/goprodiy/commen ... nstraints/
Re: Controlling a GoPro Via Wifi.
An easier option is to use the free GoPie software that I created for the Raspberry Pi. You just need to download and install the files, followed by a configuration using a simple file on a USB drive (no coding necessary). It can interface a GoPro with an RC transmitter, switches/buttons, and microcontrollers (eg. arduino). Check it out at www.graftrobotics.com/gopie 
.
.