By enabling force_turbo=1 the arm is able to disable the dynamic overclocking. The same isn't true for all the gpu_freq namely v3d/h264
I'm using XBMC (openelec) and from experiments I've learnt v3d_freq is to do with the 3d transitions on the GUI. I've set it past the default 250. when using the command vcgencmd measure_clock v3d
I get output 0 when in standby. It only increases when I do something to XBMC (moving around) but theres some delay to reach the desired freq and I get stuttering. Funnily enough the isp high even though I'm not using it.
My question is how can I get v3d to always be on my config setting of 360 (v3d_freq=350) so I get a more fluid experience (the way isp_freq=360 is all the time) and second question how do I set isp_freq=0 all the time. I've set that at the config.txt but it still never accepts my input.