Is it possible to configure Raspberry Pi as a bridge with Raspberry pi being a client to an external WiFi access point and it has a device connected on its ethernet port.
I have a Raspberry pi 3 that is configured as Wifi Access point and also bridges the ethernet and WiFi and there is a device(device_1) connected to its ethernet port. I have another Raspberry Pi 3 that has a device(device_2) connected to its ethernet port and is connected to the AP(Raspberry Pi 3 mentioned above) on its wifi interface. For the devices to talk to each other, they need to be on the same subnet which is possible if the Wlan and Ethernet interfaces on second Raspberry Pi( wifi client) can be bridged.
I came accross a post in the forum(pretty old) which stated that Wifi bridging with Wifi client was not allowed.
https://raspberrypi.stackexchange.com/q ... o-ethernet
Has anyone tried this and could get it working ? Or any other suggestions to acheive this ?
Thanks in advance.