Page 1 of 1

BLE Connection to Nordic UART Service (NUS).

Posted: Thu Sep 29, 2016 1:37 pm
by awneil
Related: viewtopic.php?f=63&t=161352

I'm trying to use an RPi-3 to communicate with a BLE device using Nordic's proprietary UART service ("NUS"):

https://infocenter.nordicsemi.com/index ... _eval.html

Getting there gradually, but if anyone has any hints, tips - or a full working solution - that would be a great help!

Re: BLE Connection to Nordic UART Service (NUS).

Posted: Tue Mar 20, 2018 1:48 am
by Tarcas
I am trying to do exactly the same thing. Did you manage to make any headway?
I'm using an nRF52832, care of a Fanstel module soldered to a (self-designed) breakout board.
This works great when connected to my smartphone. I'm able to connect, and send serial commands to turn my onboard LEDs on and off.
With the Pi, I'm able to connect, but I'm not able to pair, and I haven't gotten serial to work either. I've attempted numerous tutorials and none of them have worked for me.

I would welcome any suggestions. I'm using an RPi 3 (non-plus) with the 2017-09-07-raspbian-stretch.img image updated after the 3/2018 (3b plus) update, although I was working on this before that update was released as well.

Re: BLE Connection to Nordic UART Service (NUS).

Posted: Tue Mar 20, 2018 1:06 pm
by Douglas6
I wrote some code for communicating with an HM-10 here: viewtopic.php?f=28&t=193923&p=1232385&h ... y#p1214606.

The NUS service will be different, but it might help.