Full config.txt options for RPi2 with default value

[Si3Ste]

Hi,

I am looking for all default values for parameters of RPi 2.

Got it for RPI 1 here :
http://www.raspberrypi.org/documentatio ... fig-txt.md

but can't find for RPi 2. for exemple, I can't find default value of gpu_freq for RPi2.

[expandables]

The gpu of the raspberry pi 2 is the same as the B+ so the gpu_freq is still 250

[jdb]

The options for Pi2 are exactly the same. Note that a future firmware update will allow a single config.txt to specify options for a Pi2 *and* a Pi1 independently.

The only changes are to the default settings - on Pi 2 arm_freq is 900MHz by default and sdram_freq is 450MHz by default.

[sbp]

Note that a future firmware update will allow a single config.txt to specify options for a Pi2 *and* a Pi1 independently.
.

Thanks for the info, will this allow us to have two different initramfs one for RPI2 and another for all the "older" RPi's?

And then a common field in cmdline.txt like: "initramfs initramfs.gz followkernel" should load both the initramfs at the correct place?

Could you please give an indication whether this change is coming anytime soon?

Steen