Page 1 of 1

Model A and Model 2 R2 GPIO pinout.

Posted: Tue Apr 08, 2014 8:59 pm
by jimmybobby
So I have two living Model B Revision 2 pis, and I have 1 Model A on the way.
This reason for this was is suited my project better to have no Ethernet, as there was no real need; everything is on an SD card ready to be used anyway.

However, the python scripts rely on GPIO pins being the same.

Are the pin assignments the same?

If not, what is the pinout for the Model A?

Re: Model A and Model 2 R2 GPIO pinout.

Posted: Wed Apr 09, 2014 6:23 am
by rpdom
The Model B Rev.2 and Model A GPIO pins are identical (it's the same board, just with a few component changes).

Re: Model A and Model 2 R2 GPIO pinout.

Posted: Wed Apr 09, 2014 8:25 am
by jimmybobby
Thanks! I was searching on google - but it seemed to give me identical results.
I thought this was because Model B r 2 was possibly more popular, but turns out they are the same.
Many thanks!