Raspberry Pi Forums

I have a model B and a d-link usb hub with its own power, and a Edimax EW-781Un pluged into it. So there is no power issues
My problem is that no matter which out of the box flavour of XBMC I use cannot get the wifi to work, with ethernet cable connected no problems. WIFI manager sees my network but will not accept my ssid, password, etc.
I have no problems with WIFI using NOOBS Raspbain but I dont know how to add XBMC onto it.
In a nutshell I am a newbie and just want any XBMC to work on my Pi with WIFI.
Thanks in advance

google xbmc user manuel and look it up there gives step by step instructions
by Phill Rymer » Thu Dec 12, 2013 11:00 pm

•Once the Raspberry Pi has booted up, go to Programs > OpenELEC OS Settings and select Network tab.
•In the Network tab, set the Network Technology as WLAN, Network Interface as wlan0 and WLAN SSID as your network’s name.
•Scroll down a bit and set WLAN security and WLAN Passphrase according to your home network’s settings.
•Click OK and reboot the system.

it should now be connected

credit to media experience never had problems using this