Page 1 of 1
HDMI issues
Posted: Thu Dec 05, 2013 8:43 am
by Rogermort
My Pi boots and displays OK through HDMI to my old (five years old) Sony Bravia but when connected to my new Panasonic E6, there's no video display. Even using exactly the same leads? Can anybody offer a clue as to where the problem might be?
Re: HDMI issues
Posted: Thu Dec 05, 2013 9:03 am
by RaTTuS
Re: HDMI issues
Posted: Thu Dec 05, 2013 9:31 am
by Rogermort
Many thanks but I'd actually already found that before posting. That response seems to address 'no hdmi output at all' but my issue is specific to one TV. Works fine on the Bravia, same Pi, same lead, produces no picture on the Panasonic?
Re: HDMI issues
Posted: Thu Dec 05, 2013 9:41 am
by RaTTuS
well maybe the tv is not managing to tell the RPI that it has a hdmi signal ,
so try with the hdmi_force_hotplug=1
or boost amount
start at thee top and work down
Re: HDMI issues
Posted: Thu Dec 05, 2013 11:59 pm
by Phill Rymer
some tvs have a source button in the menu you may need to change source to hdmi manually
Re: HDMI issues
Posted: Sat Dec 07, 2013 1:52 pm
by Rogermort
You are not going to believe this! Tried everything listed with the config.txt file and still no joy. Decided to look into the startup light procedure in more depth. Removed the RS Components branded cover and bingo! Working straight away!
